Common problem
Damaged kitchen cabinet hinges
Sagging doors, loose hinges or doors that will not close can often be adjusted or replaced. Safe checks, likely contributors and what to share when enquiring.
Kitchen cabinet doors open and close many times a day, so hinges and fixings work hard. A door that sags, rubs, swings open or will not close properly is a common complaint, and it is often fixable without replacing the whole kitchen. Sometimes, though, a failed hinge is a sign that the cabinet panel itself has been weakened. This page helps you describe the issue and prepare for an assessment. It is general guidance, not a diagnosis.
What you might notice
- A door that drops at one corner or no longer lines up with its neighbours.
- A door that rubs against the frame or another door.
- A hinge that has pulled out of the door or cabinet side.
- Soft-close hinges that slam or no longer close gently.
- Doors that will not stay shut or swing open by themselves.
- Screws that turn without tightening.
- Swollen, cracked or crumbling board around the hinge position.
Possible contributing factors
These are common contributors to hinge problems. They are listed to help you describe the issue rather than to identify its cause.
- Adjustment. Many concealed hinges have adjustment screws, and doors can drift out of alignment over time.
- Worn hinge mechanisms. Springs and soft-close dampers can wear with use.
- Stripped screw holes. Repeated loosening can enlarge screw holes in particleboard or MDF.
- Moisture damage. Cabinets near the sink, dishwasher or kettle can absorb moisture and swell, weakening the board where hinges are fixed.
- Door weight. Heavy or tall doors may need more hinges or a different hinge type.
- Wall fixings. For wall units, the issue may be the cabinet’s fixing to the wall rather than the hinge.
Safe checks before you enquire
These checks are gentle and do not involve removing cabinets or working at height.
- Open and close each affected door slowly and note where it catches, drops or sticks.
- Look at the hinges and note whether they are concealed or surface-mounted, and whether any are visibly broken.
- Photograph each hinge, including any manufacturer markings, and the board around it.
- Check for swelling, damp or staining around cabinets near the sink, and look for leaks under the sink.
- If a door is hanging loosely, empty the cabinet and keep the door closed or remove heavy items so it does not fall.
- Do not climb on worktops or chairs to reach high wall units. If a wall cabinet is tilting, empty it from a safe position and keep clear of it.
Information that helps the assessment
- The number of doors affected and their positions in the kitchen.
- Photographs of the hinges, doors and any damaged board.
- The hinge type, if known, and whether you would like soft-close hinges.
- Whether any cabinets near the sink are swollen or have been affected by leaks.
- Whether you are considering wider cabinet changes, such as new doors or handles.
- For rented homes, whether the owner approves replacements.
The kitchen planning checklist can help if hinge repairs are part of a wider kitchen plan.
Which service fits
Kitchen cabinet installation can include adjusting doors and drawers, replacing hinges and installing specified hardware, as well as replacing selected units where boards are damaged. For door adjustment, hinge replacement and minor cabinet restoration, carpentry and joinery repairs can also be discussed. If hinge work is one of several small tasks around the home, a handyman visit with a shared task list may be the practical choice. Where a sink leak has damaged the cabinets, the leak is best addressed before the cabinets are repaired. Share your location when enquiring; visit times are confirmed when you book.
Enquire
Describe what you are seeing
Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.
Visit times and any assessment charge are confirmed before booking.