Freshly sealed white silicone joint along the edge of a bathtub against wall tiles

Renovation and finishes

Silicone sealing and regrouting

A service for owners refreshing tired kitchen and bathroom finishes, replacing discoloured or failed silicone and deteriorated grout around baths, showers, basins, worktops and tiled areas.

Overview

What silicone sealing and regrouting covers

Sealant and grout do a quiet but important job. Silicone flexes at movement joints where tiles meet baths, trays and worktops, while grout fills the gaps between tiles. Over time silicone peels, splits or discolours, and grout cracks, crumbles or stains. Classic Apex removes the failed material properly, prepares the joints and applies fresh, specified products.

The result can make a bathroom or kitchen look much cleaner and close surface gaps where water can enter. It is important to be clear about the limit, though: resealing deals only with visible joints. If a concealed waterproofing layer or pipe has already failed, surface sealing will not repair it, and Classic Apex will recommend a separate investigation.

Suitable for owners refreshing kitchen and bathroom finishes.

When it helps

What are you noticing?

Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.

Failed sealant

Silicone around the bath, shower tray, basin or kitchen sink has peeled away, split, turned black with mould staining or shrunk, leaving visible gaps along the joint.

Request a quotation for this

Damaged grout

Grout lines on shower walls or floors have cracked, crumbled, washed out or become stained beyond cleaning, and some nearby tiles may sound hollow when tapped.

Request a quotation for this

Local surface gaps

There are small gaps at worktop upstands, around pipe entries or along skirting tiles where water from cleaning or splashes could find its way behind finishes.

Request a quotation for this

Scope

What the assessed scope can include

The final scope depends on the assessment and is written into your quotation.

  1. 01

    Joint assessment

    An assessment can include identifying which joints need silicone and which need grout, checking for hollow tiles and noting signs of leaks beyond the surface.

  2. 02

    Removal of old sealant

    The scope can include cutting out old silicone fully, removing residue so new sealant bonds to clean surfaces rather than over old material.

  3. 03

    Grout raking

    Regrouting can include raking out damaged grout to a suitable depth with tools that avoid chipping tile edges, then cleaning out dust.

  4. 04

    Surface preparation

    Preparation can include cleaning joints, treating surface mould staining and allowing surfaces to dry fully before new material goes in.

  5. 05

    Specified resealing

    Application can include sanitary-grade silicone suited to wet areas, tooled to a neat profile, in a colour agreed with you.

  6. 06

    Regrouting and finishing

    Work can include filling joints with the specified grout, cleaning tile faces and advising on curing time before the area is used.

Price factors

What changes the quotation

Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.

Length of joints
The total run of silicone and area of grout to replace largely determine the time needed for a resealing or regrouting visit.
Removal difficulty
Old silicone layered over previous sealant, or very hard grout, takes longer to remove cleanly without damaging tiles.
Grout type
Cementitious grout and epoxy grout differ in cost, working time and the skill needed to apply and clean them.
Number of rooms
Combining several bathrooms and the kitchen into one visit spreads set-up time compared with single-room bookings.
Mould staining
Heavily stained joints may need extra preparation, and some staining in surrounding grout may not fully lift.

Key specification choices

Sealant grade
Use a sanitary silicone intended for wet areas, compatible with the surfaces it bonds to.
Grout selection
Choose cementitious or epoxy grout based on the area, cleaning habits and joint width.
Curing period
Agree how long the area must stay dry and unused after application, following product guidance.

Process

How the work is organised

The visit depends on the amount of removal and the number of areas, but drying and curing times often matter more than application. Surfaces need to be dry before sealing, and products need time before water exposure. Planning the visit for a time when the bathroom can stay out of use helps. The schedule is confirmed with the quotation.

  1. Assessment

    Joints and grout are inspected, hollow tiles are tapped and checked, and any signs of water beyond the surface are noted. The difference between surface sealing and concealed waterproofing is explained for your situation.

  2. Quotation

    The quotation lists each area, removal of old material, preparation, the specified silicone and grout, colours, curing time and any access needs, together with exclusions such as tile replacement or waterproofing repair.

  3. Work

    Old sealant is cut out and grout raked where agreed, joints are cleaned and dried, and new material is applied and tooled. Tile faces are cleaned of grout haze before it hardens.

  4. Completion

    Joints are checked for continuity and neat finish, the area is tidied and you are told how long to wait before using the bath, shower or sink, plus any observations needing further attention.

A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.

Preparation

How to prepare

  • Photograph each joint and grout area that concerns you.
  • Measure or estimate the length of silicone joints in each room.
  • Clear toiletries, bottles and mats from the bath, shower and worktops.
  • Avoid using the shower or bath for several hours before the visit so surfaces can dry.
  • Arrange an alternative bathroom for the curing period.

Free checklist

Sealant and grout scope checklist

Use this to define a resealing or regrouting job clearly before requesting a quotation.

Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.

Go further with the bathroom checklist

FAQs

Silicone sealing and regrouting: common questions

Ask about your property
Can new silicone go over the old silicone?

It is not recommended. New sealant applied over old material bonds poorly and tends to fail early, often trapping mould behind it. Classic Apex removes old silicone fully and cleans the joint first so the new bead adheres to the tile and fixture surfaces.

Will resealing stop my leak?

It can, if water is getting through a failed surface joint. If the leak comes from a concealed membrane, a pipe or a waste fitting, resealing will not fix it. Signs such as staining in the room below or wet skirting elsewhere suggest a deeper problem worth investigating separately.

Should I choose epoxy grout?

Epoxy grout resists staining and water better than standard cementitious grout and suits busy showers and kitchen splashbacks. It costs more and needs careful application. For lightly used areas, a good cementitious grout may be sufficient. The choice can be discussed during assessment.

How long before I can shower again?

That depends on the products used and the room conditions. Sealants and grouts each have their own curing guidance, and using the area too early can spoil the finish. The specific waiting time is given with the quotation and confirmed at completion.

Enquire

Request a silicone sealing and regrouting quotation

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us