Air conditioning
Domestic exhaust fan installation
A service for homeowners and apartment renovators replacing a noisy or failed bathroom or kitchen extract fan, or improving ventilation where steam and odours linger.
Scope and charges are agreed in writing before work starts.
SCOPE
Suitable domestic fan mounting and compatible connections.
BOUNDARY
Commercial extraction and shared shaft alterations are separate.
Overview
What domestic exhaust fan installation covers
A domestic exhaust fan pulls moist or stale air out of a bathroom, toilet or kitchen and pushes it along a duct to an outlet. When the fan is noisy, weak or stopped, steam lingers, mirrors stay fogged and odours hang around. Replacement looks simple, but the fan must suit the duct size, the discharge route, the power supply and the switching arrangement.
This service focuses on suitable domestic fans connected to existing outlets. Classic Apex can assess the outlet, duct and power before recommending a model. In many apartments, fans discharge into a shared shaft, which cannot be altered without building approval. Commercial kitchen extraction and shared shaft alterations sit outside this scope.
Suitable for homeowners and apartment renovators.
When it helps
What are you noticing?
Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.
Fan replacement
The existing bathroom or kitchen fan is noisy, rattling, slow to start or has stopped entirely, and you want a compatible replacement fitted to the same outlet.
Request a quotation for thisBathroom ventilation concern
Steam lingers after showers, mirrors stay fogged, condensation forms on ceilings or odours remain in toilets, suggesting the current fan is not moving enough air.
Request a quotation for thisRenovation upgrade
A bathroom or kitchen renovation is planned and you want a quieter, better-specified fan, perhaps with a timer or humidity sensor, fitted as part of the work.
Request a quotation for thisScope
What the assessed scope can include
The final scope depends on the assessment and is written into your quotation.
- 01
Outlet and duct check
The assessment can include identifying the duct size, route and outlet, checking whether it leads outside or into a shared shaft, and noting any blockage.
- 02
Fan selection advice
Advice can include recommending a fan with suitable extraction rate, duct diameter, noise level and controls for the room size and the existing outlet.
- 03
Removal of the old fan
The scope can include safely isolating the supply, removing the old fan and checking the condition of the duct connection behind it.
- 04
Mounting and duct connection
Installation can include mounting the new fan in the ceiling or wall opening and connecting it to the existing duct with suitable fittings and seals.
- 05
Electrical connection
Work can include connecting the fan to the existing suitable supply and switching, including timer or humidity controls where the fan and wiring allow.
- 06
Testing
Completion can include running the fan, checking airflow at the grille, confirming the timer or sensor works and checking for rattles or vibration.
Price factors
What changes the quotation
Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.
- Like-for-like or upgrade
- Fitting a similar fan to the same opening is simpler than enlarging openings or changing to a different duct size.
- Fan type and controls
- Basic fans cost less than quiet models, inline fans or units with timers, humidity sensors or run-on features.
- Duct condition
- A crushed, disconnected or blocked duct may need repair or replacement of accessible sections before the new fan can work.
- Access
- Fans above high ceilings, in tight voids or behind fixed ceilings without access panels take longer to replace.
- Number of fans
- Replacing fans in several bathrooms at once can share set-up time compared with single visits.
Key specification choices
- Extraction rate
- Choose a fan whose rated airflow suits the room size and use, considering duct length and bends.
- Duct diameter and backdraft
- Match the fan spigot to the duct size and include a backdraft shutter where suitable.
- Controls
- Agree switching method, such as light-linked, separate switch, timer or humidity sensor.
Process
How the work is organised
Most timing questions centre on fan availability, access to the ceiling void and whether the duct needs attention. Bathrooms can usually remain in use with short interruptions. Combining fan replacement with renovation or ceiling work avoids repeat disruption. The proposed timing is confirmed after assessment.
Assessment
The existing fan, opening, duct and outlet are inspected, and the power and switching arrangement is checked. Whether the discharge goes to an external wall or a shared shaft is established before any recommendation.
Quotation
The quotation sets out the recommended fan, duct connection, controls, making good around the opening, supply responsibility, any duct repair found necessary and exclusions such as shared shaft alterations or new wall penetrations.
Work
The supply is isolated, the old fan is removed and the duct connection is inspected. The new fan is mounted, connected to the duct and to the existing suitable supply and switching.
Completion
The fan is run to confirm airflow, controls such as timers or humidity sensors are tested, and noise and vibration are checked. The area is tidied and product information is handed over.
A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.
Preparation
How to prepare
- Photograph the fan grille and, if visible, the model label.
- Note whether the fan runs with the light or has its own switch.
- Describe symptoms such as noise, weak airflow or condensation.
- Find out whether the outlet leads outside or to a shared shaft, if known.
- Clear items from shelves and surfaces beneath the fan.
Free checklist
Exhaust fan installation checklist
Work through this list before replacing a bathroom or kitchen fan so the right model is chosen.
Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.
Advice
Useful reading before you enquire
Planning bathroom fixtures and connections
Plan bathroom fixtures around their connections: toilet, basin, shower, bath, water heater, fan and lighting, plus what changes when positions move.
Read more GuideCooker hood installation questions
Before fitting a cooker hood, check ducted or recirculating use, the outlet, mounting, power supply and cabinet clearances, and what a quote should cover.
Read moreCan I replace my fan with a more powerful one?
Possibly, but a stronger fan only helps if the duct and outlet can handle the airflow. Long or narrow ducts, many bends or a restricted shared shaft limit performance. The assessment checks the route before recommending a model, so the upgrade is worthwhile.
My apartment fan connects to a shared shaft. Can it be changed?
Replacing the fan itself on an existing connection is often possible, but altering the shaft connection or how air enters it usually needs building management approval. Check with them first and ask for any rules in writing. Shared shaft alterations are outside this scope and need separate arrangements.
Why does my bathroom fan run but not clear steam?
Common causes include a blocked or disconnected duct, a failed backdraft shutter, a fan undersized for the room, or not enough replacement air entering under the door. The assessment looks at these before assuming a new fan is the answer.
Is a humidity-sensing fan worth having?
It can help where people forget to switch the fan on or off, as it runs when moisture rises. It needs compatible wiring and correct setting. For simple toilets, a timer run-on may be enough. The choice depends on how the room is used.
Related
Often arranged alongside
Electrical installation
Assessed fixtures wiring and suitable power connections.
View serviceBathroom renovation
Agreed fixtures waterproofing tiling and technical work.
View serviceCooker hood installation
Domestic hood mounting and compatible connections.
View servicePart of air conditioning. See the full service directory.
Enquire
Request a domestic exhaust fan installation quotation
Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.
Visit times and any assessment charge are confirmed before booking.