Property maintenance

Apartment maintenance

Repairs and upkeep inside your apartment, for owner-occupiers, tenants and landlords who need in-unit faults, worn fittings or tenancy changeover tasks organised around building access requirements.

Request a quotation

Scope and charges are agreed in writing before work starts.

Bright apartment living room with large windows and a sofa

SCOPE

Systems and finishes inside the apartment.

BOUNDARY

Shared risers and plant remain separately managed.

Overview

What apartment maintenance covers

Apartment maintenance has a boundary that villa work does not: the front door. Inside the unit, the AC fan coil or split unit, taps, sockets, finishes and fitted joinery are usually the responsibility of the owner or occupier. Beyond it, the building operator manages shared risers, chilled water plant, corridors and common pipework. Classic Apex works on the systems and finishes inside the apartment, and helps you identify when a problem actually starts in a shared system.

Because the work happens in a managed building, planning matters as much as the repair itself. Many towers ask for contractor registration, a work permit or a booked service lift, and tenants often need landlord approval before anything is replaced. Sorting these points out at the enquiry stage avoids a wasted visit and keeps the building management informed.

Suitable for flat owners tenants and landlords.

When it helps

What are you noticing?

Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.

Faults inside the unit

A bathroom extractor that has stopped, a kitchen tap that drips, a dead socket or an AC unit that is not cooling the bedroom. These in-unit faults can be assessed and quoted together.

Request a quotation for this

Worn fittings and finishes

Loose door handles, failing cabinet hinges, discoloured sealant, scuffed walls and chipped tiles. Grouping them into one visit makes better use of the access arrangements you have made with the building.

Request a quotation for this

Preparing for a new tenancy

Between tenants, landlords often need repairs, touch-up painting and an AC service before handover. A checklist-led visit helps the unit present well and gives a record of what was done.

Request a quotation for this

Problems that may come from outside the unit

Water staining from above, low pressure on every tap or no chilled water to the fan coil. Assessment helps show whether the cause is in-unit or a matter for building management.

Request a quotation for this

Scope

What the assessed scope can include

The final scope depends on the assessment and is written into your quotation.

  1. 01

    In-unit fault assessment

    The visit can include checking each reported item, confirming whether it sits within the apartment boundary and noting where building management needs to be involved.

  2. 02

    AC care inside the apartment

    Scope can include filter care, drain checks and quoted repairs on split units or the in-unit fan coil, excluding the building's central chilled water supply.

  3. 03

    Plumbing fixtures

    Work can include repairs and approved replacements of taps, mixers, flush mechanisms, flexible hoses and visible pipework inside the unit.

  4. 04

    Electrical fittings

    The scope can include repairing or replacing switches, sockets and light fittings on the apartment's own circuits after a fault is assessed.

  5. 05

    Finishes and joinery

    Upkeep can include touch-up painting, sealant renewal, tile replacement where stock matches, and adjustment of doors, wardrobes and kitchen cabinets.

  6. 06

    Handover preparation

    For landlords, a visit can include working through a condition list before a tenancy begins, with photographs of completed items where agreed.

Price factors

What changes the quotation

Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.

Number and type of items
A few small fixes in one room differ from a whole-unit list covering AC, plumbing, electrical and finishes.
Building access requirements
Permit applications, service lift bookings, parking and restricted working hours affect how much time can be spent on site.
Replacement parts
Whether fittings are supplied by Classic Apex or by the owner, and whether they match the existing style, affects the quote.
Diagnosis needed
Leaks of unknown origin or circuit faults may need investigation before a repair can be priced.
Handover deadline
Work that must finish before a fixed tenancy start may need to be scheduled in a particular way.

Key specification choices

Boundary note
The quotation records which items are in-unit and which have been referred to building management, so responsibility is clear later.
Approved replacements
Fittings are specified by type and finish so a landlord can approve them in advance and keep the unit consistent.
Condition record
Before-and-after notes or photographs for tenancy changeovers, where agreed, without any conclusion about deposits or liability.

Process

How the work is organised

Timing in apartments is shaped by building rules as much as by the work: permit processing, service lift slots, parking and quiet hours can all limit when work happens. Parts that need ordering, landlord approval for replacements and the availability of someone to provide access also affect scheduling. The visit plan is agreed once these points are known.

  1. Assessment

    Your list, photographs and building details are reviewed. A visit is arranged where diagnosis is needed, and the access steps required by the building, such as permits or lift booking, are confirmed first.

  2. Quotation

    The written scope lists each in-unit item with proposed parts, any item referred to building management and the approvals still needed from the owner or landlord. Nothing outside that list is started without your agreement.

  3. Work

    Approved items are completed within the building's permitted hours. Floors and furniture are protected, tools and materials travel by the agreed lift, and debris is taken down by the route building management allows.

  4. Completion

    Items are checked with you or your agent, the unit is left tidy and, for handovers, the condition list is updated with what has been done and anything still outstanding.

A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.

Preparation

How to prepare

  • Tell us the building name and unit floor so access rules can be checked.
  • Ask building management whether a permit, contractor registration or lift booking is needed.
  • Confirm who will let the visit in and who can approve extra items.
  • Photograph each issue and note when it started.
  • If you are a tenant, get the landlord's approval in writing for replacements.
  • Clear sinks, wardrobes and areas around the AC unit before the visit.

Free checklist

Apartment repair readiness checklist

Use this before booking any in-unit repair. It covers the access and approval steps that most often delay apartment visits.

Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.

Go further with the handover checklist

FAQs

Apartment maintenance: common questions

Ask about your property
Who is responsible for a leak coming from the flat above?

That usually depends on where the water originates. If it comes from a neighbouring unit, the owner of that unit or building management will need to be involved; if it is a shared pipe, the building operator normally handles it. An assessment can help identify the likely source, but repairs outside your unit need the responsible party's agreement.

Can you service the AC if my building has central chilled water?

The in-unit fan coil, its filter, drain tray and thermostat can usually be checked inside the apartment. The chilled water supply, central plant and building pipework belong to the building operator. If the unit receives no chilled water at all, the issue is typically one to report to building management.

Do I need a permit for small repairs?

It depends on the building. Some require registration or a permit for any contractor visit, while others only ask for notice of larger works. Check with your building management before the visit, and share their requirements so the work can be planned around them.

Can you prepare my apartment between tenants?

Yes. A handover visit can work through repairs, touch-up painting, sealant renewal and an AC service against a checklist, with notes of what was completed. It records condition for your reference but does not decide any deposit question between landlord and tenant.

Enquire

Request a apartment maintenance quotation

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us