Guide
Questions to settle before apartment repairs
Settle responsibility, approvals, building access and payment before apartment repairs begin, with a checklist for tenants, owners and landlords.
By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For apartment tenants, owner-occupiers and landlords
Repairs in an apartment involve more people than repairs in a standalone house. Depending on the problem, the tenant, the owner, the building management and sometimes the neighbours above or below may all have a part to play. Settling a few questions before work starts avoids delays, wasted visits and disputes about who pays. This guide sets out those questions and how to record the answers.
Is the problem inside your unit or part of the building?
The first question is where the fault actually sits. Fittings inside your apartment, such as taps, mixers, sockets, light fittings and split AC units, are usually the unit’s responsibility. Systems that serve several apartments, such as shared water risers, drainage stacks, corridor lighting, central cooling plant and the building’s main electrical supply, are usually handled by the building operator.
The exact boundary differs between buildings and tenancy agreements, so treat the table below as a starting point and confirm the details for your property.
| Issue | Often raised first with | Points to confirm |
|---|---|---|
| Dripping tap or running toilet in the unit | Owner or tenant, depending on the tenancy terms | Who approves replacement parts |
| Water coming through the ceiling | Building management and the unit above | Source of the leak and access to the other unit |
| Blocked shared drain or stack | Building management | Whether the blockage is in the unit branch or the shared line |
| AC not cooling (unit-based split) | Owner or tenant | Who arranges and pays for servicing |
| AC not cooling (central or district cooling) | Building management | Whether the issue is the supply or the in-unit equipment |
| Whole-apartment power loss | Building management or the utility | Whether neighbours are affected |
Shared systems remain outside an apartment repair scope unless access and responsibility have been agreed with the building operator. If you are unsure, a quick message to building management describing what you see, with a photograph, is usually the fastest way to find out who should act first. It can also save the cost of a visit that cannot fix a problem located outside the unit.
Who approves the work, and who pays?
If you are a tenant, check your tenancy contract and speak to your landlord or their agent before arranging anything beyond a very minor repair. Replacements and alterations normally need the owner’s approval, and some landlords prefer to use their own maintenance arrangements. Get the approval in writing, even a short message, and note who is paying.
If you own the apartment and rent it out, decide in advance how you want tenants to report issues and which repairs they may arrange directly. A simple rule, such as “minor repairs up to an agreed limit, anything else needs approval”, saves time for everyone.
Owner-occupiers have fewer people to consult but still need to consider the building’s rules, especially for anything that changes fixed installations.
It also helps to agree what happens if the assessment finds more than expected. For example, a call about a dripping mixer might reveal that the isolation valve beneath the basin is also failing. Decide in advance whether the person on site can approve that extra item, or whether it should be quoted and sent to the owner first. Writing this down at the start avoids a second visit purely to wait for a decision, and it keeps the approval trail clear for everyone involved. Where the owner is abroad, agree a contact method and a reasonable reply time so that work is not left half finished.
What does the building need before work starts?
Most residential buildings have rules about contractors. Before booking, check with building management:
- whether a work permit or access request is needed, and how long it takes to arrange
- which days and hours work is allowed, and whether noisy work has tighter limits
- whether service lifts must be booked and protected
- where contractors can park and load
- whether any alterations, such as moving fixtures or adding fittings, need approval
Share these details when you enquire. They affect when a visit can happen and whether the first visit can include the repair or only the assessment.
Recording the issue properly
A clear record helps the assessment and any approval. Before you enquire, note:
- the location within the apartment, using room names
- when you first noticed the problem and whether it is getting worse
- photographs or a short video, taken safely
- any related events, such as water appearing after a neighbour’s shower or a breaker tripping when a particular appliance runs
- the make and model of the item, if visible
For leaks in particular, our guide on what information helps a plumbing enquiry explains what to photograph and what to record.
Handover records and tenancy changes
Repairs often cluster around the start and end of a tenancy. A dated condition record at move-in and move-out, with photographs of each room and a note of any known faults, makes it easier to distinguish wear and tear from damage and to agree what needs doing between tenants. Landlords who manage several units find that a consistent checklist saves time at every changeover. Move-in and move-out preparation can combine painting, minor repairs, AC servicing and sealant work into one scope, though any deposit or tenancy outcome remains a matter between landlord and tenant.
Questions checklist
Before any apartment repair, try to answer each of these:
- Is the fault in the unit or in a shared building system?
- Who is responsible under the tenancy agreement?
- Who approves the work, and is that approval in writing?
- Who pays for the assessment, parts and labour?
- What does building management require for access?
- Are neighbours affected or needed for access?
- Is there an annual maintenance contract (AMC) already in place that covers this?
Next step
Use the landlord handover checklist to record condition and responsibilities in one place before work is booked. The apartment maintenance page explains how in-unit repairs are assessed and quoted around building access requirements.