Common problem

Repeated electrical tripping

A breaker or RCD that keeps tripping is a warning worth taking seriously. Safe things to note, possible contributing factors and what helps an assessment.

Protective devices such as breakers and residual current devices are designed to switch off the supply when something is not right. When they trip once, the cause might be a single faulty appliance. When they trip again and again, it is a sign that the circuit or something connected to it needs a proper look. This page explains what to note safely and how to prepare for an assessment. It is not a diagnosis, and it does not include any work inside the distribution board.

What you might notice

  • One breaker or RCD switching off repeatedly.
  • Tripping that happens when a particular appliance is switched on.
  • Tripping at certain times, such as when the AC, water heater and cooker are all running.
  • Tripping after rain, cleaning or a leak in the property.
  • A breaker that will not stay on at all.
  • Lights or sockets on one circuit going off while the rest of the property is fine.

Possible contributing factors

These are common contributors to repeated tripping. They are listed to help you describe what is happening, not to identify the fault.

  • A faulty appliance. Damaged cables, worn elements or moisture inside an appliance can trip a protective device.
  • Moisture. Water entering a socket, outdoor light or fitting can cause tripping.
  • Circuit load. Several high-demand appliances on one circuit may cause a breaker to trip.
  • Wiring or fitting faults. Loose connections, damaged cables or failing accessories need a qualified assessment.
  • Protective device condition. A device itself can develop faults, but this needs testing rather than assumption.

Repeated tripping should be investigated. Replacing a breaker with a higher rated one is not a fix and should never be done without the circuit design being verified.

Safe checks before you enquire

Do not open the distribution board cover, remove sockets or switch plates, or touch any wiring. Only use the switches that are normally available to you.

  1. Note which breaker or RCD tripped. Many boards have labels; photograph the board with its cover closed.
  2. Note what was running when it tripped, including the AC, water heater, kitchen appliances and any outdoor equipment.
  3. Unplug appliances on the affected circuit. If it is safe and the device resets normally, you can plug them back in one at a time to see whether one appliance triggers the trip. Stop if it trips immediately.
  4. Do not keep resetting a breaker that trips straight away.
  5. Look for any visible water, damp or damage near sockets, outdoor lights or appliances, without touching them.
  6. Keep appliances that seem to cause tripping switched off and unplugged until they have been checked.

Information that helps the assessment

  • Which breaker or RCD trips, and a photograph of the board’s labels with the cover closed.
  • When the tripping happens and how often.
  • Any appliance or activity that seems to trigger it.
  • Recent changes, such as new appliances, renovation work, leaks or heavy rain.
  • The property type, its age if known and whether a building operator controls part of the supply.

The maintenance planner can help you set out these notes clearly.

Which service fits

Repeated tripping is assessed through electrical maintenance, with testing and safe isolation matched to the work. Following diagnosis, the proposed repair or replacement is set out for approval. If the investigation shows a circuit needs alteration or new capacity, electrical installation can be discussed, with any distribution board work or new circuits assessed separately and approvals addressed as applicable. Major supply faults, or systems controlled by the utility or building operator, need the appropriate responsible party. The guide on preparing an electrical fault enquiry has more on what to record. Share your location when enquiring; visit times are confirmed when you book.

Enquire

Describe what you are seeing

Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us