Common problem
Faulty or damaged socket
A cracked, loose, scorched or dead socket should be left alone until checked. Safe steps to take, possible contributors and what to share when enquiring.
Sockets are used every day, so wear and damage are fairly common. A socket that has stopped working, feels loose or shows signs of heat should be treated with care until it has been checked. This page explains what you might notice, what can contribute and the safe steps to take before you enquire. It is general guidance rather than a diagnosis, and it does not involve removing faceplates or touching wiring.
What you might notice
- A socket that no longer powers anything plugged into it.
- Plugs that feel loose or fall out easily.
- A cracked, chipped or broken faceplate.
- Brown or black marks around the pins or on the plug.
- A socket or plug that feels warm during use.
- A switched socket where the switch feels loose or does not click.
- A socket that has come away from the wall.
Possible contributing factors
These are common contributors to faulty sockets. They are listed to help you describe the problem, not to identify the fault.
- General wear. Repeated use can weaken the contacts that grip the plug pins.
- Overloading. Several high-demand appliances on one socket, especially through adaptors or extension leads, can cause heat.
- Loose connections. Connections behind the faceplate can loosen over time and cause heat or intermittent power.
- Physical damage. Furniture, cleaning equipment or impacts can crack faceplates.
- Moisture. Sockets near sinks, outdoor areas or leaks can be affected by water.
- Circuit issues. A dead socket may be on a circuit that has tripped, or may relate to a fault elsewhere on the circuit.
Safe checks before you enquire
Do not remove the faceplate, push it back into the wall or touch any exposed parts. Only use the switches and devices normally available to you.
- Stop using the socket. Switch it off if it has a switch and unplug anything connected, provided the plug and socket are not hot or damaged. If they are, switch off the circuit at the breaker if you can reach it safely.
- Check whether other sockets in the same room are working, and note whether a breaker or RCD has tripped.
- Look at the plug of the last appliance used and note any marks or damage.
- Photograph the socket from a safe distance.
- Move furniture so the socket is not used by mistake, and let others in the household know.
- Avoid using adaptors or extension leads to work around the problem.
Information that helps the assessment
- The location of the socket and what it is usually used for.
- Photographs of the socket and any marks on the plug.
- Whether a breaker or RCD has tripped and which one.
- How many sockets are affected.
- Any changes you would like at the same time, such as relocating the socket or adding USB outlets.
- For tenants, who approves the repair and any building access rules.
The maintenance planner can help you list this with any other electrical jobs.
Which service fits
Damaged and faulty sockets are handled through electrical maintenance, with suitable repairs or replacements proposed for approval after diagnosis and testing matched to the work performed. If you would like to add sockets or move existing ones, electrical installation covers the planning, with cable routes, circuit suitability and load capacity checked first. The guide on planning new sockets can help you decide where additional outlets would be most useful. Share your location when enquiring; visit times are confirmed when you book.
Related problems
Flickering lights
Lights that flicker, dim or buzz can relate to a lamp, driver, dimmer or wiring. Safe checks to make, what may contribute and what to share when enquiring.
Read more ProblemRepeated electrical tripping
A breaker or RCD that keeps tripping is a warning worth taking seriously. Safe things to note, possible contributing factors and what helps an assessment.
Read moreEnquire
Describe what you are seeing
Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.
Visit times and any assessment charge are confirmed before booking.