Property maintenance

Building maintenance

Maintenance support for building owners and property managers who need shared areas, selected technical assets and recurring defects looked after against a defined, written scope.

Request a quotation

Scope and charges are agreed in writing before work starts.

Exterior of a modern multi-storey residential building with balconies

SCOPE

Named shared areas and selected technical assets.

BOUNDARY

No automatic lift, fire or central plant coverage.

Overview

What building maintenance covers

A building rarely fails all at once. A corridor light stays out for weeks, a stairwell wall gets scuffed and never repainted, a lobby washroom tap keeps dripping. Each item looks minor, but together they shape how residents, tenants and visitors judge the property. Classic Apex can help you bring these items into one maintenance scope, with agreed electrical, plumbing, air conditioning and general repair work organised around the areas you name.

The starting point is clarity about what is being maintained. Following an assessment, the defects found are listed, grouped by priority and priced for approval, so you can decide what is corrected now and what is planned for later. A defined scope also makes it obvious which systems sit with other contractors, which matters in buildings where several service providers already work on site.

Suitable for building owners and property managers.

When it helps

What are you noticing?

Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.

Recurring faults in shared areas

The same corridor fitting, washroom cistern or door closer keeps being reported. Recording each repeat helps the assessment look for a cause rather than treating the symptom again on every visit.

Request a quotation for this

Common area lighting out of order

Lobby, corridor, stairwell or car park lights that are failing, flickering or left on unnecessarily. Agreed fittings can be checked and repaired, with any wider circuit concerns raised for separate assessment.

Request a quotation for this

Damaged or worn finishes

Scuffed walls, chipped tiles, stained ceilings or damaged skirting in entrances and corridors. These can be scheduled as planned upkeep so the building presents consistently between larger refurbishment cycles.

Request a quotation for this

No single picture of building defects

Reports arrive by email, phone and messaging from different people. A consolidated defect list gives the owner or manager one place to see what is open, what is approved and what is complete.

Request a quotation for this

Scope

What the assessed scope can include

The final scope depends on the assessment and is written into your quotation.

  1. 01

    Condition walk-through

    The assessment can include a walk-through of the named shared areas, noting visible defects, access constraints and items that need a specialist or the building operator to review.

  2. 02

    Electrical fittings in agreed areas

    Work can include checking and repairing accessible lighting, switches and sockets in the named areas, with circuit faults investigated before any repair is proposed.

  3. 03

    Plumbing in shared washrooms and utility rooms

    Scope can include repairs to taps, cisterns, visible pipework and fixtures in common washrooms, pantries and cleaners' rooms within the agreed boundary.

  4. 04

    Selected air conditioning units

    Where common areas are served by individual split or cassette units, the scope can include their inspection, filter care and quoted repairs once the units are listed.

  5. 05

    Finishes and general repairs

    Upkeep can include touch-up painting, tile replacement subject to matching stock, door and hardware adjustment, and minor fixings in corridors, lobbies and stairwells.

  6. 06

    Defect register and priorities

    Visits can include updating a shared list of defects, the agreed priority for each, the approval status and any recommendation for further investigation.

Price factors

What changes the quotation

Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.

Areas and assets named
The number of floors, corridors, washrooms and listed assets sets the size of the scope more than the overall size of the building.
Planned or corrective work
A recurring planned schedule, a one-off defect clear-up and ad hoc reactive repairs are priced differently and can be combined.
Access and working windows
Restricted hours, occupied lobbies, permit requirements and the need for access equipment at ceiling height all affect labour planning.
Materials and matching
Whether paint, tiles and fittings are matched to existing finishes, supplied by the owner or specified new changes the material element of the quote.
Condition at the start
A building with a long backlog of open defects needs a larger initial corrective scope than one that has been looked after steadily.

Key specification choices

Asset list
Each maintained item is named by location and type, so there is no doubt about whether, for example, a basement light or a roof-level unit is in scope.
Priority levels
Defects are grouped by agreed priority, such as safety-related, operational and cosmetic, so approvals can be staged rather than all-or-nothing.
Replacement standards
Replacement fittings, paint systems and tiles are agreed in advance, so repairs match the existing finishes and stay consistent over time.

Process

How the work is organised

Scheduling depends on how many areas are involved, building rules on working hours and noise, permit or approval steps, and whether materials need to be ordered to match existing finishes. Common area work is often planned in phases so that lobbies and corridors stay usable. The programme is confirmed in the quotation once the scope and access arrangements are known.

  1. Assessment

    The named areas are walked with your access contact. Visible defects are photographed and logged, and items belonging to lift, fire or central plant providers are marked for referral rather than repair.

  2. Quotation

    You receive a written scope listing each defect, its location, the proposed repair, materials and any exclusions. Items can be approved one by one, grouped by priority or bundled into a planned schedule that suits your budget cycle.

  3. Work

    Approved repairs are scheduled around building hours, with work areas protected and residents or tenants kept clear. Anything unexpected found during work is raised for approval before it is added.

  4. Completion

    Each closed item is recorded on the defect register with a short note and photographs where agreed. Recommendations for further investigation, and any defects referred to lift, fire or plant providers, are passed back to the owner or manager.

A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.

Preparation

How to prepare

  • List the shared areas you want looked after, floor by floor.
  • Gather recent defect reports, complaints or photographs, including dates where you have them.
  • Note which systems already have a maintenance contractor and who to contact for each.
  • Nominate one access contact who can open plant rooms and locked doors.
  • Share any house rules on working hours, noise and use of service lifts.

Free checklist

Building asset and defect register

A simple register helps you see what the building contains, what is wrong with it and who is responsible. Use these headings to start your own before requesting an assessment.

Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.

Go further with the maintenance planner

FAQs

Building maintenance: common questions

Ask about your property
Can you maintain only part of a building?

Yes. The scope is built around the areas and assets you name, which might be a single lobby and its corridors, the car park lighting, or every shared washroom. Anything outside that list stays with whoever currently looks after it, and the quotation states the boundary clearly so there is no overlap with other contractors.

Do you look after the lifts or fire systems?

Not as part of building maintenance. Lifts, fire alarm and suppression systems, and central plant usually have their own specialist contractors and maintenance records. If a defect you report turns out to involve one of these systems, it is noted and passed back to you so the responsible provider can attend.

Is this the same as a building maintenance contract?

Not quite. Building maintenance can be arranged as one-off corrective work or a short planned programme. A building annual maintenance contract (AMC) sets out a twelve-month arrangement with planned visits, covered assets and defined repair support. Many owners start with a defect clear-up and then decide whether an annual agreement suits them.

How are repairs approved?

Each defect is priced separately in the written scope, so the owner or manager can approve, defer or decline items individually. If additional work is discovered once a repair is under way, it is described and priced for approval before it proceeds, rather than being added to the invoice afterwards.

Enquire

Request a building maintenance quotation

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us