Light oak-effect plank flooring in a bright living room with white skirting

Renovation and finishes

Wooden flooring installation

Installation of a specified engineered wood, laminate or other agreed floor system for owners and refurbishment customers who want a warmer finish in bedrooms, living areas or a full apartment or villa.

Overview

What wooden flooring covers

Wood and wood-effect floors look similar in a showroom but behave very differently once fitted. Engineered boards have a real timber wear layer over a stable core, laminate uses a printed decorative layer under a protective surface, and vinyl is a plastic-based product with its own fitting rules. Classic Apex names the exact system in each quotation.

Most of the work that decides how a floor performs happens before the first board goes down. The substrate is checked for level, moisture and soundness, the layout is planned so joints and cuts fall sensibly, and door clearances, thresholds and skirting details are agreed. Old floor removal and levelling are listed separately.

Suitable for owners and interior refurbishment customers.

When it helps

What are you noticing?

Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.

A new floor finish

You are moving away from tiles or carpet in some rooms and want a wood or wood-effect surface, but need help choosing between engineered, laminate and other systems for each space.

Request a quotation for this

A worn or damaged floor

Existing boards are scratched, lifting at joints, swollen near a doorway or squeaking underfoot, and you want to know whether local repair is realistic or replacement is the sensible route.

Request a quotation for this

A room or property upgrade

A bedroom refresh, tenancy changeover or wider renovation is planned, and the new floor needs careful sequencing with painting, skirting, door adjustments and furniture moves.

Request a quotation for this

Scope

What the assessed scope can include

The final scope depends on the assessment and is written into your quotation.

  1. 01

    Substrate assessment

    The assessment can include checking the existing floor for flatness, cracks, hollow areas and visible moisture concerns, then recommending whether levelling or other preparation is needed first.

  2. 02

    Material guidance

    Advice can include comparing engineered wood, laminate and any other agreed system for each room, considering use, sunlight and nearby wet areas.

  3. 03

    Layout and quantity planning

    Planning can include measuring each room, agreeing board direction, deciding where joints and cuts fall, and allowing a sensible waste margin for pattern and offcuts.

  4. 04

    Underlay and installation

    The agreed scope can include laying the specified underlay or moisture barrier and installing the selected boards using the floating, glued or other method the system requires.

  5. 05

    Expansion gaps and trims

    Finishing can include leaving the expansion gaps the product needs, then fitting skirting, scotia, threshold strips or transition profiles where the new floor meets other finishes.

  6. 06

    Door clearance checks

    Work can include checking whether doors still swing freely over the raised floor height and, where agreed, trimming door bottoms or adjusting stops to suit.

Price factors

What changes the quotation

Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.

Floor system chosen
Engineered boards, laminate and other systems differ in material cost, underlay needs and fitting time, so the product choice shapes the whole quotation.
Existing finish removal
Lifting old tiles, carpet or boards and removing adhesive adds labour and disposal, especially where the old floor is bonded firmly to the slab.
Substrate preparation
Uneven or damaged slabs may need grinding, patching or levelling compound before installation can start.
Room shapes and cuts
Small rooms, corridors, pillars and doorways mean more cutting and trims than one open space of equal area.
Trims, skirting and doors
The number of thresholds, new skirting runs and doors needing trimming all add measurable items to the scope.

Key specification choices

Wear layer or surface rating
For engineered wood, agree the real timber wear layer thickness; for laminate, agree the surface wear rating suited to the room's traffic.
Underlay and moisture barrier
Select an underlay compatible with the board and the slab, including a moisture barrier where the manufacturer calls for one.
Installation method
Confirm whether the system is floating, glued down or otherwise fixed, as this affects preparation, cost and future replacement.

Process

How the work is organised

Scheduling depends on whether material is in stock or ordered, how long boards need to acclimatise, whether old tiles must come up first and whether levelling compound needs drying time. Occupied homes are often done room by room so furniture can be moved around, which changes the sequence. The proposed programme is confirmed once the assessment and material choice are settled.

  1. Assessment

    Rooms are measured, the substrate is checked for level and moisture concerns, and door clearances and adjoining finishes are noted. Your preferred material is discussed against how each room is used.

  2. Quotation

    The quotation names the exact flooring system, underlay, trims, removal of the old finish, any preparation and door work, together with who supplies the boards and the quantities and waste margin allowed.

  3. Work

    Areas are protected, the old floor is removed if agreed, the substrate is prepared and the boards are laid to the planned direction, with expansion gaps kept and cuts finished neatly.

  4. Completion

    Skirting and transition trims are fitted, doors are checked for free movement, loose dust is cleaned away and you receive any product care guidance supplied by the manufacturer for the chosen system.

A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.

Preparation

How to prepare

  • Measure each room roughly and note any steps, thresholds or level changes between spaces.
  • Photograph the existing floor, including any cracked tiles, hollow sounds or stains near wet areas.
  • Clear small items, rugs and fragile furniture from the rooms before the agreed start.
  • Let boxed flooring acclimatise in the room for the period the manufacturer recommends, if you are supplying it.
  • Tell Classic Apex about underfloor services, cables or heating you know of.

Free checklist

Floor material and quantity planner

Collect these details so flooring quotations compare like with like.

Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.

Go further with the flooring quantity

FAQs

Wooden flooring: common questions

Ask about your property
Can wooden or laminate flooring be laid over existing tiles?

Often it can, provided the tiles are firmly bonded, reasonably flat and free of moisture problems. The extra height must then suit doors, thresholds and kitchen plinths. Loose or hollow tiles usually need attention first. The assessment confirms whether overlaying or removal is the better option.

Is engineered wood suitable near a bathroom or kitchen?

It depends on the product and the exposure. Standing water and repeated splashes can damage the edges of engineered boards. Some laminate and vinyl products are marketed for damper areas with their own conditions. Share the room location and how wet it gets so suitable options can be compared honestly.

How do I work out how much flooring to buy?

Measure each room's length and width, add the areas together and then allow an extra margin for cutting and pattern waste. Herringbone and rooms with many corners need more. The flooring quantity planner on this site can help you set out the figures before the quotation.

Will the quotation include skirting and threshold strips?

Only if they are listed. Skirting, scotia beading, threshold profiles and door trimming appear as separate items so you can see what each adds. If existing skirting is staying, say so, as removing and refitting it differs from fitting new lengths.

Enquire

Request a wooden flooring quotation

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us