Guide

How to measure a flooring project

Measure rooms for new flooring, work out net area, add a waste allowance, convert square feet and record the details a flooring quotation needs.

By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners, landlords and tenants planning new flooring

Good measurements make a flooring enquiry far easier to plan. They help you compare products, set a realistic budget range and check that a quotation covers the whole area you want finished. This guide explains how to measure rooms, how to turn those figures into an order quantity, and what else to record so the assessment and quotation start from the same information.

Treat your figures as a planning estimate. Walls are rarely perfectly square, and the person installing the floor will want to check dimensions, levels and the condition of the existing floor before quantities are fixed.

What to measure and how

Use a tape measure or laser measure and record everything in metres to two decimal places. If a plan or product box uses feet, convert at the end rather than mixing units halfway through.

  • Measure wall to wall at floor level. Take the measurement where the new floor will sit, not at skirting height or across the top of furniture.
  • Measure twice in each direction. If a room is 4.00 m at one end and 4.06 m at the other, use the larger figure.
  • Split awkward rooms into rectangles. An L-shaped living area becomes two rectangles. Measure each one separately and add the areas.
  • Include the parts people forget. Door thresholds, built-in wardrobe floors, alcoves and the space under a fixed bed base may or may not be included. Decide which, and note it.
  • Deduct fixed items that stay. A kitchen island, a built-in unit or a fixed bath that will not be moved can be measured and subtracted.
  • Sketch the layout. A simple drawing with each rectangle labelled and the doorways marked is more useful than a list of numbers.

Photograph each room from the doorway and note the current floor finish. That context matters as much as the dimensions.

Working out net area and order area

Area of a rectangle is length multiplied by width. Net area is the total of all rectangles, less any fixed items you are deducting.

The order area adds a waste allowance for cutting, pattern, breakages and a small reserve for future repairs:

Order area = net area × (1 + waste allowance)

The waste allowance is written as a decimal, so an allowance of 8% becomes 0.08. There is no single correct allowance. A simple straight layout in a rectangular room usually needs less than a diagonal or herringbone pattern, a room with many corners and doorways, or a product with large planks or tiles. Ask the installer what allowance they suggest for your chosen product and layout, and why.

Flooring is usually sold by the box or pack, so the final step is:

Boxes needed = order area ÷ coverage per box, always rounded up to the next whole box.

A worked example

For example, imagine an apartment where the owner wants a single flooring product across a living room and a short hallway. The figures are examples chosen to show the method.

Area Measurement Calculation Area
Living room 5.20 m × 4.00 m 5.20 × 4.00 20.80 m²
Hallway 3.00 m × 1.20 m 3.00 × 1.20 3.60 m²
Less built-in unit 1.50 m × 0.60 m 1.50 × 0.60 −0.90 m²
Net area 20.80 + 3.60 − 0.90 23.50 m²

If the installer suggested a 10% allowance for this layout:

  • Order area = 23.50 × (1 + 0.10) = 23.50 × 1.10 = 25.85 m²
  • If one box covered 2.20 m², boxes needed = 25.85 ÷ 2.20 = 11.75, rounded up to 12 boxes
  • Twelve boxes would supply 12 × 2.20 = 26.40 m²

Converting between square metres and square feet

Product data, older drawings and some suppliers use square feet. The conversion is:

  • 1 m² = 10.7639 ft², so square feet = square metres × 10.7639
  • Square metres = square feet ÷ 10.7639
  • For lengths, 1 ft = 0.3048 m

Using the example above, the net area of 23.50 m² is 23.50 × 10.7639 = 252.95 ft², and the order area of 25.85 m² is 25.85 × 10.7639 = 278.25 ft². If you measured in feet, convert each length to metres first, or calculate the area in square feet and divide by 10.7639. Do not round until the last step.

Skirting, trims and transitions

Skirting and trims are measured in linear metres, not square metres. Measure the perimeter of each room and subtract door openings. In the living room above, the perimeter is (5.20 + 4.00) × 2 = 18.40 m; less a 0.90 m doorway, that leaves 17.50 m of skirting before any allowance.

Count every place where the new floor meets a different finish, such as tiles in a kitchen or a balcony threshold. Each one may need a transition profile or a level change, and these are easy to leave out of a quotation.

Details that change the scope

Area is only part of the picture. Record these points as well, because they affect method, materials and price:

  • The existing floor: tiles, screed, old laminate, carpet or something else, and whether it is to be removed.
  • Level differences between rooms and at thresholds.
  • Door clearance: whether doors will need trimming once the new floor and underlay are down.
  • Signs of moisture, cracked tiles or hollow-sounding areas in the existing floor.
  • Ground-floor rooms, rooms next to bathrooms and areas near external doors.
  • Fixed appliances or furniture that will need moving.
  • Building rules on noise, working hours and underlay, which your building management can confirm.

If you are still choosing between materials, the guide to timber, engineered wood and laminate explains the differences, and tiled areas are covered under tile installation.

Questions to ask in a flooring quotation

  • Is the quoted area the net area or the order area, and what waste allowance has been used?
  • Who supplies the flooring, underlay, skirting and trims?
  • Is removal and disposal of the existing floor included?
  • Is any levelling or substrate preparation included, or priced separately if needed?
  • Are door trimming, skirting replacement and transition profiles included?
  • How will spare boxes be handled, and can unopened boxes be kept for future repairs?
  • What happens if concealed defects are found when the old floor comes up?

Next step

Enter your room measurements in the flooring quantity planner to organise net area, allowance and box counts before you enquire. When you are ready, share your sketch, photographs and preferred material through the wooden flooring service page so the assessment can confirm quantities and scope.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us