Guide
Timber, engineered wood and laminate explained
How solid timber, engineered wood and laminate flooring differ in construction, moisture tolerance, refinishing and installation, and what to ask first.
By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners and landlords choosing wood or wood-effect flooring
Wood and wood-effect floors are popular for living rooms and bedrooms, but the names used to sell them can be confusing. Solid timber, engineered wood and laminate can look similar in a photograph, yet they are made differently, behave differently and suit different situations. Vinyl and other wood-effect products are different again. This guide explains how the three main options compare, so you can ask the right questions and make sure the quotation describes exactly what you are buying.
How each material is made
Solid timber flooring is made from a single piece of wood through its whole thickness. Its surface is real wood, and depending on its thickness and how it was installed, it can usually be sanded and refinished during its life.
Engineered wood has a top layer of real wood, called the wear layer, bonded to a core made of several layers, often plywood or a similar board. The layered core helps it stay more stable than solid timber when temperature and humidity change. Whether it can be sanded and refinished, and how many times, depends on the thickness of the wear layer, so ask for that figure.
Laminate has a high-density fibreboard core, a printed decor layer that shows the wood pattern, and a clear protective wear layer on top. It looks like wood but contains no real wood surface. Laminate cannot be sanded and refinished; a badly damaged board is usually replaced.
Vinyl and similar products are another category, made from plastic-based materials. They are sometimes described loosely as wood flooring because of their appearance, which is why accurate naming in a quotation matters.
A side-by-side comparison
| Question | Solid timber | Engineered wood | Laminate |
|---|---|---|---|
| Surface | Real wood throughout | Real wood wear layer | Printed decor under a wear layer |
| Core | Solid wood | Layered board | High-density fibreboard |
| Refinishing | Usually possible, depending on thickness | Depends on wear layer thickness | Not possible |
| Stability with humidity changes | More prone to movement | Generally more stable than solid | Depends on the product; core can swell if it gets wet |
| Typical installation | Often fixed or glued | Floating or glued | Usually floating |
| Feel and sound underfoot | Natural wood feel | Natural wood surface | Can sound hollower without good underlay |
These are general characteristics. Products vary widely, so always check the manufacturer’s information for the specific floor you are considering, including where it may be installed and how it should be cleaned.
Moisture and the subfloor
Moisture is one of the main risks for any wood or wood-based floor. Before choosing a material, think about where it will go.
- Bathrooms, shower rooms and laundry areas are generally not suitable for wood or laminate. Tiles are usually a better choice for these rooms.
- Kitchens need care. Spills and leaks from sinks and appliances can damage wood-based floors. Check the manufacturer’s guidance, and consider whether tiles would be more practical.
- Ground floors and slabs may hold moisture, especially newer concrete or screed. The subfloor should be checked before installation, and a suitable moisture barrier may be needed.
- Rooms with frequent temperature changes, such as those where air conditioning runs heavily at some times and is off at others, can cause wood to expand and contract.
The assessment should check the subfloor for moisture, flatness and soundness before the material is confirmed. A floor laid on an uneven or damp base is unlikely to perform well, whatever the material.
Installation details that change the scope
Several practical points affect both the result and the quotation:
- Existing floor: whether the old floor will be removed, or whether the new floor can be laid over it. Some systems can go over sound, flat tiles, but this must be confirmed at assessment.
- Levels: a new floor raises the floor height, which affects transitions to adjoining rooms and tiled areas.
- Door clearances: doors may need trimming to open over the new floor. If doors need adjusting or re-hanging, carpentry and joinery can be included in the scope.
- Expansion gaps: floating floors need space around the edges to move, covered by skirting or trims.
- Skirting and trims: whether existing skirting is removed and refitted, replaced or retained with a trim.
- Underlay: the type of underlay affects sound, comfort and moisture protection.
- Furniture: who moves it, and where it goes during the work.
Apartments and sound
In apartments, hard floors can carry footstep noise to the unit below. Some buildings set requirements for acoustic underlay or for approval before hard flooring is installed. Before you choose a product, check with building management whether any requirements apply, whether approval is needed and what contractor access arrangements are in place. If you rent, confirm with your landlord before making any change to the floors.
Questions to ask before choosing
- Is this solid timber, engineered wood, laminate or another product? Please name it exactly.
- For engineered wood, how thick is the wear layer, and can it be refinished?
- Is the product suitable for this room and its conditions?
- How will the subfloor be checked for moisture and flatness?
- Which installation method and underlay are proposed?
- Is removal of the existing floor included, along with disposal?
- How are thresholds, door clearances, skirting and trims handled?
- What waste allowance is included in the quantity?
If you are comparing floors because the current one is tired or damaged, our page on a worn floor finish explains what to note before an assessment.
Next step
Measure your rooms and estimate quantities with the flooring quantity planner, then share the room sizes, the existing floor and your preferred material when you enquire. The wooden flooring page explains how the subfloor, layout and selected system are assessed before installation is quoted.