Common problem
Worn internal flooring
Scratched, faded, lifting or swollen flooring can be repaired or replaced. Safe checks, possible contributing factors and what to share before an assessment.
Floors take more wear than almost any other surface in a home or office. Over time, wooden, laminate and other finishes can scratch, fade, gap or lift, and the cause is not always just age. Understanding what has happened to the existing floor helps you decide whether a repair, a refresh or a full replacement makes sense. This page explains what to look for and how to prepare. It is general guidance and not a diagnosis.
What you might notice
- Scratches, dents or worn paths through living areas and hallways.
- Fading or discolouration, often near windows.
- Gaps opening between boards or planks.
- Edges that curl, lift or feel soft.
- Swelling or bubbling, especially near kitchens, bathrooms or AC units.
- Creaking, bouncing or hollow sounds underfoot.
- Doors that now catch on the floor.
Possible contributing factors
These are common contributors to worn or damaged flooring. They are listed to help you describe what you see, not as a diagnosis.
- Everyday wear. Foot traffic, grit and furniture movement wear down surface layers.
- Sunlight. Strong sun through windows can fade and dry some finishes.
- Moisture. Spills, mopping with too much water, leaks or AC condensation can cause swelling in wood and laminate products.
- Expansion gaps. Floating floors need room to expand at the edges; without it, boards can lift or buckle.
- Substrate condition. An uneven or damp base can lead to movement, gaps and hollow sounds.
- Material type. Solid timber, engineered wood, laminate and vinyl behave differently, so the right remedy depends on what is installed.
Safe checks before you enquire
These checks are visual and simple. Do not lift boards, cut into the floor or use heavy sanding equipment.
- Photograph worn areas, with a wider view of each room.
- Note whether damage is concentrated near windows, doors, wet areas or AC units.
- Press gently on swollen or soft areas and note whether they feel damp.
- Check whether the skirting or trims leave a visible gap at the edges.
- Look for any spare boards or product labels from the original installation.
- Wipe up any standing water promptly, and mention any suspected leak when you enquire.
Information that helps the assessment
- The rooms affected and approximate floor areas.
- The current flooring material, if known, and photographs including close-ups of the surface and edges.
- Whether you want to repair damaged areas or replace the floor throughout.
- Your preferred replacement material, if you are considering a change.
- Door clearances, level changes between rooms and any underfloor concerns.
- Whether the property is occupied and how furniture will be moved.
The flooring quantity planner can help you estimate areas before you enquire, and the guide on flooring material comparison explains how different materials differ.
Which service fits
Wooden flooring can cover checking the substrate, planning the layout and installing the selected system with suitable underlay, expansion provisions and trims, with the material named accurately in the quotation. If a hard-wearing tiled finish suits the room better, tile installation can be discussed. Where doors need trimming or skirting and trims need adjusting after a new floor, carpentry and joinery repairs can be added. Share your location when enquiring; visit times are confirmed when you book.
Enquire
Describe what you are seeing
Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.
Visit times and any assessment charge are confirmed before booking.