Air conditioning
AC installation and replacement
Planning and installation of new or replacement air conditioning for owners and authorised property managers, from site survey and equipment selection to connections, drainage and operational testing.
Scope and charges are agreed in writing before work starts.
SCOPE
Assessed equipment installation connections and testing.
BOUNDARY
No sizing guarantee from room area alone.
Overview
What AC installation and replacement covers
Replacing an air conditioner looks simple on paper: take the old one out, put a new one in. In practice, the right choice depends on how the room is used, how much sun it receives, the existing pipe and drain routes, the electrical supply and where the outdoor unit can sit. Classic Apex starts with a survey of the space and the existing installation so the proposal reflects what the room actually needs.
Matching the new unit to the old unit's size is a common shortcut, but the old unit may have been wrong for the room, or the room may have changed. Cooling capacity is assessed from the survey, not guessed from floor area alone. The quotation then sets out equipment, mounting, pipework, drainage, insulation, electrical connection and testing, with supply, removal of the old unit and making good listed separately.
Suitable for owners and authorised property managers.
When it helps
What are you noticing?
Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.
Replacement needed
An existing unit has reached the point where repair no longer makes sense, or parts are unavailable. The survey checks whether existing pipe routes and the outdoor location can be reused.
Request a quotation for thisCooling a new room
A converted study, extended living space or room that never had dedicated cooling. Installing a new unit requires checking pipe routes, drainage and power supply from scratch.
Request a quotation for thisFailing existing unit
A unit that breaks down repeatedly, struggles in summer or is noisy despite repairs. Comparing ongoing repair cost with replacement can help you decide which route to take.
Request a quotation for thisScope
What the assessed scope can include
The final scope depends on the assessment and is written into your quotation.
- 01
Site survey
The assessment can include measuring the room, noting sun exposure and use, inspecting the existing unit and identifying routes for pipework, drainage and power.
- 02
Equipment specification
The proposal can include a recommended system type and capacity range, with options where several suitable models exist, and the reasoning behind each recommendation.
- 03
Removal of the old unit
Where agreed, the scope can include disconnecting and removing the existing unit safely, with disposal arrangements stated clearly in the quote.
- 04
Mounting and pipework
Installation can include mounting indoor and outdoor units, running or connecting refrigerant pipework with insulation, and fixing pipe covers where specified.
- 05
Drainage and electrical connection
The work can include routing the condensate drain with suitable falls and connecting the unit to a suitable existing electrical supply.
- 06
Commissioning and testing
Completion can include pressure and leak checks, evacuation, start-up and operational testing, followed by basic operating guidance for the controller and filters.
Price factors
What changes the quotation
Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.
- Equipment supply
- Whether Classic Apex supplies the unit or you supply your own, and the model selected, significantly affects the total.
- Reuse of existing routes
- Reusing suitable existing pipework and drainage is simpler than running new routes through walls or ceilings.
- Outdoor unit location
- Balcony, roof or high-wall positions may need brackets, lifting arrangements or access equipment, which add to the cost.
- Electrical supply
- A suitable existing supply keeps the scope simpler; a new circuit adds assessment and cost.
- Removal and making good
- Disposal of the old unit and repairs to finishes are separate lines that you can include or exclude.
Key specification choices
- System type
- Wall-mounted split, ducted, cassette or other system, chosen for the space and installation constraints and only where capability is confirmed.
- Capacity selection
- Based on the survey: room size, sun exposure, occupancy, glazing and use, rather than matching the old unit by default.
- Pipework and insulation
- Pipe sizes, insulation and route are specified to suit the equipment, with external covers where agreed.
- Drain route
- Gravity drainage with suitable falls where possible, or a condensate pump where gravity is not achievable, stated in the quote.
Process
How the work is organised
Timing depends on equipment availability, whether the existing routes can be reused, approvals needed for outdoor unit placement and any lifting arrangements in multi-storey buildings. New rooms with no existing routes need more planning. Installation in hot months may be in higher demand, so planning replacement before a unit fails completely gives more flexibility.
Assessment
A site survey looks at the room, its use and exposure, the existing equipment, pipe and drain routes, power supply and outdoor unit position, so a suitable system can be proposed.
Quotation
The written proposal names the equipment, capacity range, installation tasks, removal of the old unit, electrical scope, making good and supply responsibilities, with exclusions stated so you can compare it with other quotes.
Work
The old unit is removed if agreed, new units are mounted, pipework is run and insulated, drainage and power are connected, and the system is evacuated and charged as the equipment requires.
Completion
The system is leak-checked, started and tested in each mode. You are shown how to use the controller and clean the filters, the area is cleaned and any agreed making good is completed or scheduled.
A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.
Preparation
How to prepare
- Note the make, model and capacity of the existing unit from its rating label.
- Describe how the room is used and whether it receives strong afternoon sun.
- Decide whether you want Classic Apex to supply the equipment or will supply it yourself.
- Photograph the indoor unit, outdoor unit position and existing pipe route.
- Ask building management whether outdoor unit placement or lifting needs approval.
- Clear the wall and floor space where the indoor unit will go.
Free checklist
AC replacement readiness brief
Fill in these details before asking for an AC installation or replacement quote. They let the survey focus on decisions rather than basic information.
Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.
Advice
Useful reading before you enquire
Questions to ask about an AC quotation
The questions to ask about an AC cleaning, repair or installation quotation, the wording to query and how to compare proposals on the same basis.
Read more GuidePreparing for an AC replacement assessment
What to record, measure and decide before an AC replacement assessment, including sizing questions, approvals and what the quotation should separate.
Read more ProblemAC not cooling
Your AC is running but the room stays warm. Calm, safe checks to try first, what can contribute to weak cooling and what to share when you enquire.
Read moreCan you tell me the right AC size from my room area?
Room area is a starting point, but it is not enough on its own. Sun exposure, glazing, ceiling height, occupancy and use all affect cooling need. A survey gives a more reliable basis for selection, and the proposal will explain the reasoning behind the recommended capacity.
Can I buy the unit myself?
Yes, if it is compatible with the installation. The quote will then cover labour and materials only. Share the model before purchase if possible, so pipe sizes, electrical needs and mounting can be checked. Warranty for customer-supplied equipment is between you and the seller.
Will my walls need repairing after installation?
Reusing existing routes often means little or no making good. New pipe routes through walls or ceilings may need filling, sealing and repainting. The quote states whether making good is included, so you are not left with unfinished patches unexpectedly.
Do I need approval to replace an outdoor unit?
It depends on the building or community. Some have rules on condenser placement, appearance or the use of lifting equipment. Check with your building or community management before booking, and share their requirements so the installation can be planned to suit them.
Related
Often arranged alongside
AC maintenance and repair
Inspection accessible component checks and quoted repairs.
View serviceElectrical installation
Assessed fixtures wiring and suitable power connections.
View serviceGeneral property renovation
Agreed finishes and related technical alterations.
View servicePart of air conditioning. See the full service directory.
Enquire
Request a AC installation and replacement quotation
Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.
Visit times and any assessment charge are confirmed before booking.