Guide

Preparing for an AC replacement assessment

What to record, measure and decide before an AC replacement assessment, including sizing questions, approvals and what the quotation should separate.

By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners, landlords and property managers replacing AC units

Replacing an air conditioning unit is a bigger decision than a repair. It involves choosing equipment, planning how it connects to the existing pipework, drainage and power, and often working out how the old unit will be removed. A well-prepared assessment saves time and gives you a quotation you can compare with confidence. This guide covers what to think about first, what to record and what the written proposal should include.

Repair or replace: questions to consider

Not every fault means a unit should be replaced. Before deciding, it helps to think through:

  • How often has the unit needed repair recently, and for what?
  • Has a technician explained that a major component has failed?
  • Are parts for this model still readily available?
  • Is the unit still meeting the needs of the room, or has the room changed?
  • Are you renovating, so that replacement would avoid disturbing new finishes later?

There is no single age or repair count that settles the question. Ask for the reasoning behind any replacement recommendation, and ask what a repair would involve as an alternative, so you can compare the two.

Record the existing installation

Before the assessment, gather what you can about the current set-up. Take photographs from the floor or a safe position; do not open units or climb onto roofs or ledges.

  • Indoor unit: type (wall-mounted split, ducted, cassette or other), room location and a photograph of the label if it can be read safely
  • Outdoor unit: location, how it is reached and a photograph of the label if visible
  • Pipe route: where pipes leave the room and how far they appear to run to the outdoor unit
  • Drainage: where condensate water goes, for example to a drain point or outside
  • Controls: the type of remote or wall controller
  • Power: whether the unit has a visible isolator nearby
  • Known issues: leaks, noise, poor cooling, tripping or anything unusual

Describe the room, not just the old unit

The size of the existing unit is useful information, but it should not decide the new one on its own. The cooling a room needs depends on things such as its floor area, ceiling height, how much glass it has, which direction it faces, how many people use it and what heat-producing equipment is in it. A room that has gained a kitchen opening or lost an internal wall may need something different from what was installed originally.

Help the assessment by noting:

Detail Example of what to record
Room dimensions Length, width and ceiling height in metres
Glazing Large windows or glass doors, and which way they face
Use Bedroom, living area, home office, gym
Occupancy Typical number of people using the room
Heat sources Cooking area, computers, other equipment
Comfort issues Rooms that feel warmer than others, or uneven cooling

Ask how the proposed capacity was worked out. A clear answer is a good sign that the recommendation is based on the space rather than habit.

Approvals and building rules

Replacing like-for-like in the same position is often simpler than moving or adding equipment, but approvals can still apply. Before committing, check:

  • with building management, whether contractor access, permits or working hours apply, and whether outdoor unit locations are controlled
  • with your community management or developer, if you are in a villa community, whether external positions or visible equipment need approval
  • with your landlord, if you rent, who approves and pays for the replacement

If lifting equipment or access to a roof is needed, the building may have its own requirements. Raise this early so the assessment can plan for it.

Plan the timing and the disruption

A replacement usually means a period without cooling in the affected room, plus some noise, dust and movement through the property. Thinking about this early makes the work easier to schedule.

  • Season: if you can choose, a replacement planned outside the hottest months is easier to live with, and you are less likely to be rushing a decision because a unit has failed completely.
  • Occupied homes: decide where people will sleep or work while a unit is out of action, and whether other rooms can be cooled in the meantime.
  • Several units: if more than one unit is ageing, ask whether replacing them in stages or together makes more practical sense for your property. The answer depends on access, budget and how the units are connected.
  • Renovation: if ceilings, walls or flooring are being changed, coordinate the AC work with that schedule so pipework and drainage are in place before finishes are applied.
  • Tenanted property: agree access dates with the tenant and confirm who will be present.

Ask the assessment to explain the main stages of the work and what will be disrupted at each stage. That gives you a realistic picture before you approve anything, without relying on a promised duration that may change once the old unit is removed.

What the quotation should separate

AC replacement quotations vary in what they include. Ask for each of the following to be shown clearly, as included, excluded or optional:

  1. Equipment supply, with make, model and capacity named
  2. Removal of the old indoor and outdoor units
  3. Disposal arrangements for the old equipment
  4. Lifting or access equipment, if needed
  5. Pipework: reuse of existing pipes or new pipework, and insulation
  6. Condensate drainage connection
  7. Electrical connection, and whether any changes at the distribution board are needed
  8. Mounting brackets or supports
  9. Making good to walls, ceilings or paint after the work
  10. Testing and commissioning, and what you will be shown at handover
  11. Manufacturer warranty registration and any workmanship terms offered

Any electrical changes beyond the unit connection, such as a new circuit, should be assessed separately. Our guide to questions to ask about an AC quotation gives a fuller list for comparing proposals.

Next step

Put your room details, photographs and approval notes together in the homeowner project brief so the assessment starts with the right information. The AC installation and replacement page explains how a site survey and equipment proposal are prepared and quoted for approval.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us