Service category

Electrical services

Fault finding and repairs for the circuits and fittings you use every day, and new installations planned around what the existing system can safely support.

Electrician in gloves testing breakers and wiring inside a distribution panel

Decide

Which electrical service do you need?

  1. 01

    Tripping, flickering, a faulty socket or switch

    Electrical maintenance covers fault assessment and approved repairs or replacements.

    Electrical maintenance
  2. 02

    New lighting, extra sockets or power for equipment

    Electrical installation plans cable routes, circuit suitability and finishing.

    Electrical installation
  3. 03

    A lighting upgrade or smart thermostat

    Lighting and smart control upgrades check compatibility before anything is changed.

    Lighting and smart control upgrades

Overview

How electrical is organised

Electrical work divides naturally into two kinds of request. Something has stopped working, or keeps tripping, and needs to be found and repaired. Or you want something new: more sockets, a different lighting layout, power for an appliance. The first is electrical maintenance; the second is electrical installation. Both start with an assessment, because the safe answer depends on the circuit, the load and the condition of the existing installation.

Classic Apex will not suggest fitting a higher-rated breaker to stop a circuit tripping. Repeated tripping is a symptom to investigate. Distribution board changes, new circuits and anything controlled by the utility provider or building operator are assessed separately, with the responsible party involved.

Good to know

Before you enquire

Safe information to gather

Note which breaker tripped and what was in use at the time, whether the problem is constant or intermittent, and which rooms or fittings are affected. Photographs of a damaged socket or fitting are helpful. Do not open the distribution board, remove fitting covers or touch anything that is scorched, wet or warm. If you smell burning or see smoke, switch off at the main isolator only if it is safe to reach and call for help.

Coordinating electrical work with renovation

New lighting, socket positions and appliance power are easiest to install before ceilings are closed, cabinets are fitted and walls are painted. In a kitchen or bathroom project, the electrical layout is agreed alongside the plumbing and finishes so that each trade works in the right order.

Approvals and testing

Whether a change needs approval depends on the property and the scope. Building management, the landlord or the relevant authority may need to be consulted for new circuits or board alterations. Testing is matched to the work carried out and recorded on completion.

FAQs

Electrical: questions

Why does my circuit keep tripping?

Common causes include an overloaded circuit, a faulty appliance or a fault in the wiring or a fitting. It needs investigation. The problem page on repeated tripping lists safe checks you can make before booking.

Can you add sockets without chasing walls?

Sometimes surface trunking or an existing route can be used, but it depends on the wall construction, the circuit and the finish you want. The installation assessment sets out the options.

Do tenants need permission for electrical changes?

Usually, yes, for anything beyond like-for-like repairs. Agree with the landlord or building management before new fittings or alterations are booked.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us