Guide

Information to share about an electrical fault

The safe checks and details to note before enquiring about an electrical fault, from tripping breakers to flickering lights, and what to avoid doing.

By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners, tenants, landlords and small businesses

Electrical faults can be unsettling, and it is natural to want them fixed quickly. The most helpful thing you can do before an electrician arrives is to stay safe, avoid making the situation worse and write down what happened. A clear description often helps narrow the likely cause, so that the visit can focus on the right circuit and the right fittings. This guide covers the safety points first, then the details worth recording.

Safety comes first

Some signs mean you should stop using the affected item straight away and seek help promptly:

  • a burning smell, smoke or scorch marks on a socket, switch or fitting
  • sparking or crackling sounds
  • a socket, plug, switch or cable that feels hot
  • water near sockets, fittings, appliances or the distribution board
  • a breaker or residual current device that trips again immediately after being reset
  • any shock, however slight, from a fitting, appliance or metal fixture

In these situations, unplug the appliance or switch off the circuit at the distribution board if you can do so safely and the area is dry. Keep people away from the affected area. Do not touch anything that is wet, damaged or hot.

There are also things you should not attempt yourself. Do not remove socket or switch covers, open the distribution board, replace fittings, repeatedly reset a device that keeps tripping or try to bypass protection in any way. Live electrical work needs a qualified person.

Is the problem in your property or the supply?

If the whole property loses power, check whether neighbours or common areas are also affected. If they are, the problem may be with the building supply or the utility rather than your own installation, and building management or the utility provider is the right first contact. In apartments, the main supply and shared systems are controlled by the building operator.

If only part of your property is affected, look at the distribution board without opening it. Note whether any breaker or residual current device has moved to the off position, and read the label beside it if there is one.

What to record

The details below help the assessment more than you might expect. Write them down while they are fresh.

Detail Example
What happened Lights went off in two bedrooms; kitchen sockets stopped working
Which device tripped The breaker labelled for upstairs sockets, or an unlabelled one in the second row
What was running Washing machine and kettle at the same time
When it happens Every time the oven is switched on; only during rain; at random
How often Once, several times this week, daily
What you did Reset once, then left it off when it tripped again
Recent changes New appliance, renovation, a fitting replaced recently
Age of the installation If known, or simply that the property is older

Timing and pattern are especially useful. A fault that appears only when a particular appliance runs points somewhere different from one that occurs at random or only when it rains. If you can safely unplug appliances one by one and notice the fault stops, note that too, but do not keep resetting a device to experiment.

Photographs that help

Take photographs from a safe position without removing any covers:

  • the affected socket, switch or light fitting, close enough to show any marks or damage
  • the distribution board with its cover closed, showing the labels and which devices are off
  • any appliance involved, including its rating label if it is easy to see
  • the wider room, to show where the fitting sits

If a light is flickering, a short video can show the pattern. Our page on flickering lights lists other things worth noting.

Why repeated tripping needs investigation

Breakers and residual current devices trip for a reason. They are there to protect the circuit and the people using it. A device that trips repeatedly may be responding to an overloaded circuit, a faulty appliance, damaged wiring, moisture in a fitting or a fault to earth. It may also be faulty itself.

The answer is to find the cause, not to make the protection less sensitive. Fitting a higher rated device without checking that the circuit design supports it can remove protection that is there for safety. A proper assessment checks the circuit, the connected load and the fittings before any change is made to protective devices. Our page on repeated electrical tripping covers this in more detail.

Tenants, landlords and building management

If you rent, tell your landlord or their agent about the fault and check who will arrange and pay for the repair. Some faults may be the landlord’s responsibility under the tenancy agreement. For apartments, problems with the building supply, common area lighting or shared systems belong with building management.

If you manage several units or a small commercial premises, keep a simple fault log for each property, with the date, the circuit or fitting affected and what was done. Faults that keep returning to the same circuit are much easier to diagnose when there is a history to look at, and the log helps you decide whether a wider inspection or an upgrade would be more sensible than another one-off repair. It is also useful evidence when discussing responsibility with a landlord, tenant or building operator.

When you enquire, mention whether the property is occupied, whether anyone in the household depends on powered medical or other essential equipment, and any access arrangements. Following diagnosis, suitable repairs or replacements are proposed for approval, with testing and safe isolation matched to the work.

Next step

Record what happened and which circuits are affected in the maintenance planner, then share it with your photographs when you enquire. The electrical maintenance page explains how faults such as tripping, flickering and damaged fittings are assessed and repaired.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us