Guide
Cooker hood installation questions
Before fitting a cooker hood, check ducted or recirculating use, the outlet, mounting, power supply and cabinet clearances, and what a quote should cover.
By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners and tenants replacing or adding a domestic cooker hood
A cooker hood looks like a simple appliance to fit, but a good installation depends on several details: how the air will leave the kitchen, what the hood is fixed to, where the power comes from and how it sits with the cabinets around it. Sorting these out before you buy, or before a visit, avoids the common situation where a new hood arrives and does not suit the outlet, the cabinet or the ceiling.
This guide covers domestic cooker hoods in homes and apartments. Commercial kitchen extraction is a different system altogether and is covered briefly at the end.
Ducted or recirculating
The first question is where the air goes.
- Ducted (extraction) hoods draw air through grease filters and push it out through a duct to an outlet. They need a suitable route to an existing outlet, such as a wall vent or a dedicated kitchen extract connection.
- Recirculating hoods draw air through grease filters and then through odour filters, usually carbon based, before returning it to the kitchen. They do not need an outlet, but the odour filters need replacing according to the manufacturer’s guidance.
Many hoods can be set up either way, sometimes with an additional kit. Check what your model supports and how it is supplied.
If you want a ducted hood, look at what is already there. Is there an outlet behind or above the current hood? Where does it go? In apartments, kitchen extract outlets sometimes connect to shared shafts or building systems. Do not assume a new hood can connect to a shared shaft; ask your building management what is permitted, and expect any new opening through an external wall or into a shared shaft to need separate assessment and approval.
Mounting type and the structure behind it
Hoods come in several mounting styles, and each needs something different from the wall, cabinet or ceiling.
| Hood type | What it needs |
|---|---|
| Chimney hood on a wall | A wall that can take the fixings, space above for the chimney cover and duct |
| Under-cabinet or integrated hood | A wall cabinet of the right width and depth, cut-outs for the duct and cable |
| Telescopic or slide-out hood | A cabinet designed for the unit, with matching door or front |
| Island or ceiling hood | A ceiling that can support the hood, and a route for duct and power above |
| Downdraft or worktop extraction | Space below the worktop and a route for the duct, often planned with the cabinets |
Island and ceiling hoods are the most demanding. A gypsum ceiling may need additional support or framing above it, which should be assessed before the hood is bought. Ask what is above the ceiling and whether there is access to it.
Size, height and clearances
The hood should suit the hob below it. Width, mounting height above the hob and clearance from nearby cabinets are set by the hood and hob manufacturers, and the guidance can differ between electric and gas hobs. Keep the installation instructions for both appliances and share them when you enquire, rather than relying on a general rule.
Also check:
- The ceiling height, so the chimney cover fits the space between hood and ceiling.
- Whether wall cabinets on either side will clash with the hood body or chimney.
- Whether wall tiles or a splashback need cutting or will need making good after the old hood comes off.
- Whether the duct diameter of the hood matches the outlet and route. Reducing the duct size, adding many bends or running a long route can affect performance, so follow the manufacturer’s guidance.
Power supply
Most hoods need a nearby electrical supply. Note where the existing socket or connection point is, whether it will be hidden behind the chimney cover or inside a cabinet, and whether it is easy to isolate. If there is no suitable supply in the right place, adding one is electrical installation work that should be assessed separately, including whether the circuit is suitable. The electrical installation service covers that kind of assessed connection work.
Integrated lighting, remote controls and smart features do not usually change the supply needed, but check the instructions for anything unusual.
Before the visit and in the quotation
What to send before the visit
- The hood brand, model number and installation instructions, or a link to them.
- Photographs of the hob, the wall behind it, the existing hood and any outlet or vent.
- Photographs of the cabinets on either side and above, with door open.
- The ceiling height and the distance from hob to ceiling.
- Whether the hob is electric or gas.
- Whether you are a tenant, and whether owner or building approval has been obtained.
Questions to ask in the quotation
- Is removal and disposal of the old hood included?
- Is the duct, chimney extension or recirculation kit included, or does it need buying separately?
- Are cabinet cut-outs or adjustments included, and who carries them out?
- Is making good of tiles, paint or ceiling included if the old hood leaves marks or holes?
- Is any electrical work needed, and is it included or quoted separately?
- What checks are done after installation, such as fan speeds, lights and secure fixing?
What is separate from a domestic hood installation
Cooker hood installation does not include any gas work, including disconnecting or moving a gas hob. That needs an appropriately qualified specialist. New external wall openings, connections to shared shafts and changes to building ventilation need separate assessment and the relevant approvals. Commercial kitchen extraction, grease ducts and fire suppression systems in restaurants are specialist systems with their own design and maintenance arrangements; the guide to separating restaurant premises and equipment scopes explains how those are usually kept apart.
Next step
Add the hood model and your photographs to the kitchen planning checklist so the connection, mounting and clearances are recorded together. Then enquire through the cooker hood installation service page to confirm whether the existing outlet and supply suit the new hood.