Guide
Comparing kitchen cabinet specifications
Compare kitchen cabinet quotes line by line: carcass board, door finish, edges, hinges, drawers and plinths, plus the questions to ask before ordering.
By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners and landlords choosing new kitchen cabinets
Kitchen cabinet quotations often look similar on the surface: a layout drawing, a colour and a total. Underneath, the specification can vary widely. One quote might use a different board, a different door construction, basic hinges and partial-extension drawers; another might include soft-close hardware, full-extension runners and a moisture-resistant board under the sink. Comparing properly means reading each part of the cabinet as a separate item.
This guide explains the main parts of a cabinet specification, what to ask for each one, and how to record the answers so quotations can be compared fairly.
The parts of a cabinet
A kitchen cabinet is made up of several components, each with its own options.
- Carcass: the box that forms the sides, base, top and back of the unit.
- Doors and drawer fronts: the visible faces, which carry most of the appearance and finish choices.
- Edges: the strip applied to the cut edges of boards.
- Hinges: the mechanism that holds and controls the door.
- Drawer boxes and runners: the drawer itself and the slides it moves on.
- Shelves and internal fittings: fixed or adjustable shelves, corner solutions, pull-outs and organisers.
- Plinth and legs: the base that supports floor units and hides the gap underneath.
- Handles: visible handles, recessed profiles or push-to-open mechanisms.
Worktops, splashbacks and appliances are usually specified separately, even when the same supplier provides them.
Materials and hardware to compare
Carcass materials
Carcasses are commonly made from engineered boards such as particleboard, medium-density fibreboard (MDF) or plywood, usually with a decorative or protective surface layer. Within each type there are different grades, thicknesses and surface finishes, and some boards are made with improved moisture resistance.
Rather than assuming one material is always better, ask:
- What board is used for the carcass, back panels and shelves?
- What is the board thickness for each?
- Is a moisture-resistant grade used, and where? The sink unit, dishwasher surround and units near the hob are the areas most exposed to water and steam.
- Is the board finished on all faces, or only on visible faces?
- Can the supplier provide the product name or a data sheet?
Door finishes
Door finish has the biggest effect on appearance and on how the kitchen ages. Common options include melamine-faced board, high-pressure laminate, painted or lacquered MDF, foil or membrane-wrapped doors, timber veneer and solid timber. Each behaves differently with heat, water, cleaning and impact, and quality varies between manufacturers.
For each option, ask how the edges are finished, whether the door is the same finish on both faces, how it should be cleaned, and whether damaged doors can be replaced individually later. Request a physical sample door in the chosen colour and finish where possible, and look at it in your kitchen lighting.
Hardware: hinges, drawers and handles
Hardware is easy to overlook and is often where the cost difference between quotations sits.
- Hinges: ask whether they are soft-close, how far the door opens, and whether the hinge allows adjustment after installation.
- Drawer runners: ask whether drawers are full extension or partial extension, whether they are soft-close, and what load the runner is designed for. Deep pan drawers need more capacity than cutlery drawers.
- Corner units: ask what mechanism, if any, is used to make corner storage accessible.
- Handles: ask for the model, finish and spacing, and check that handles will not clash with neighbouring doors or appliances.
Ask for the brand or model of hinges and runners so that replacement parts can be found later.
A comparison table to fill in
Fill in one column per quotation. Any gap is a question to send back.
| Item | Quote A | Quote B | Quote C |
|---|---|---|---|
| Carcass board and thickness | |||
| Moisture-resistant board locations | |||
| Back panel material | |||
| Door and drawer front finish | |||
| Edge banding type | |||
| Hinge type and soft-close | |||
| Drawer runner type and extension | |||
| Internal fittings included | |||
| Plinth material and legs | |||
| Handles: model and finish | |||
| Worktop included and specification | |||
| Installation, removal and disposal |
Supply, installation and custom work
Be clear about which of these arrangements each quotation is for:
- Supply and install: one party supplies and fits the cabinets. Ask about lead time, delivery, storage on site and who checks the delivery for damage.
- Installation only: you have already bought the cabinets. Share the brand, the layout drawing and the assembly instructions. The installer will need to check that everything has arrived and that the layout suits the room before starting.
- Custom manufacturing: units are made to measure. This needs a confirmed manufacturing and supply arrangement, shop drawings, and a sign-off of dimensions and finishes before production.
Worktops are normally templated after the base units are fixed. Confirm who templates, who supplies and when that happens in the programme. If cabinets are part of a wider project, the guide to planning a kitchen renovation brief helps you set out the rest of the scope.
Questions to ask before you approve
- Can you provide product names, grades or data sheets for the board, doors and hardware?
- Which parts of the specification are standard and which are upgrades?
- How are cabinets fixed to walls, and is the wall suitable?
- How are gaps at walls and ceilings finished?
- What happens if a door or panel arrives damaged?
- What warranty terms apply to cabinets and hardware, and are they in writing?
- How should finishes be cleaned and maintained?
If an existing kitchen only has worn hinges or loose doors, a repair may be enough; the problem page on damaged cabinet hinges covers what to note.
Next step
Record your preferred specification in the kitchen planning checklist so every quotation responds to the same list. Then share the layout, photographs and whether the cabinets are already purchased through the kitchen cabinet installation service page so the scope can be confirmed.