Guide

Comparing renovation quotations fairly

Compare renovation quotations on equal terms: one brief, matching quantities, named materials, allowances, exclusions, payment stages and variation rules.

By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners, landlords and property managers comparing renovation quotations

When renovation quotations arrive, the natural instinct is to compare the totals. The trouble is that totals only compare like with like when every quotation covers the same work, the same materials and the same terms. In practice, each contractor interprets a brief in their own way. One includes removal and disposal, another assumes you will arrange it. One prices a named tile, another uses a low allowance. One includes making good, another excludes it in small print.

This guide sets out how to make quotations comparable, what to look for line by line, and which questions to send back before you decide.

Start with one written brief

The fairest comparison begins before any quotation is requested. Give every contractor the same written brief, with:

  • The rooms or areas included, and anything explicitly excluded.
  • Measurements or a sketch, or a note that measurements will be taken at the visit.
  • The finishes you have chosen, or the level of finish you expect where you have not yet chosen.
  • Fixtures and appliances, with model numbers where known, and who is supplying them.
  • Known problems such as leaks, cracks or damaged substrate.
  • Access arrangements, working hours and building rules, as confirmed with building management.
  • Your preferred start window and whether the property will be occupied.

If a contractor suggests changes to the brief, ask them to price the brief as written first and the alternative separately. That keeps the comparison clean while still letting you consider good ideas.

Read each quotation line by line

Lay the quotations side by side and compare each part of the scope. A table like this one makes gaps visible.

Item What to check
Scope of work Each room and task described, not just “renovation as discussed”
Quantities Areas, lengths and counts, and whether they match each other
Materials Named products, or allowances with a stated value per unit
Supply Which items the contractor supplies and which you supply
Preparation Removal, substrate repair, levelling and protection
Technical work Plumbing, electrical and AC alterations described separately
Removal and disposal Old finishes, packaging and debris, and how they leave the building
Making good Repairs to walls, ceilings and floors after removal or alteration
Cleaning Daily tidying and a final clean, and to what standard
Approvals Who obtains building or other approvals, and who pays any fees
Programme Start date, expected duration once confirmed, and dependencies
Payment stages Amount or percentage at each stage, and what triggers each one
Variations How extra work is priced and approved
Taxes Whether prices include applicable taxes
Warranty What written terms are offered for workmanship and materials

Wherever one quotation has a line that another lacks, either the second contractor has excluded it or included it elsewhere. Ask.

Allowances, provisional items and exclusions

Allowances are a common source of confusion. If a quotation includes a tile allowance per square metre, a sanitaryware allowance or a lighting allowance, the final cost depends on what you choose. A low allowance makes the total look smaller while leaving you to pay the difference later. Compare allowances directly, and ask what range of products each one would buy.

Provisional items cover work that cannot be priced until something is opened up, such as replacing damaged screed or corroded pipes. These are reasonable, but they should be described, with a rate or a method for pricing, rather than left open.

Exclusions deserve as much attention as inclusions. Read them carefully and note anything you assumed was included.

Questions to send to every contractor

Send the same questions to all contractors so the answers are comparable:

  1. Which items in my brief have you excluded or changed?
  2. Which materials are named products and which are allowances?
  3. How have you measured quantities, and can you share them?
  4. What happens if concealed defects are found, and how will additional work be priced?
  5. Is removal, disposal and making good included throughout?
  6. What protection will be used for floors, furniture and neighbouring areas?
  7. Who will be the point of contact during the work?
  8. How will changes I request during the work be priced and approved?
  9. What checks and documentation are provided at handover?

Keep the replies with each quotation. Written answers carry more weight than recollections of a phone call.

Signs a quotation needs clarification

Some quotations are not wrong, but they are hard to compare until clarified:

  • A single lump sum without any breakdown.
  • Phrases such as “as required”, “standard materials” or “to be confirmed” with no limit or rate.
  • No mention of removal, disposal or making good.
  • Payment heavily weighted to the start of the work.
  • No description of how variations are handled.
  • Technical work, such as plumbing or electrical, described only as “included”.

The guide to managing material selections before work explains how to tie allowances to actual products, and the quote comparison checklist gives you a structured sheet for recording each contractor’s answers.

Making the decision

Once quotations are comparable, the decision is rarely about price alone. Consider how clearly each contractor explained the work, how they answered your questions, how they propose to handle the unexpected, and whether their programme and payment stages suit you. A clearly written quotation is itself useful evidence of how the work is likely to be organised.

Next step

Build your written brief with the renovation brief builder so every contractor starts from the same scope. When it is ready, share it through the property renovation service page to request an assessment and a line by line quotation.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us