Renovation and finishes
Interior and exterior painting
Painting for owners, landlords and property managers, from a single room to a whole property or external walls, with surface preparation and the paint system agreed in writing.
Overview
What painting covers
Paint is the most visible finish in any property, and the quality of the result depends far more on preparation than on the final coat. Filling cracks, sanding patches, treating stains and priming bare surfaces all affect how the finish looks and lasts. Classic Apex painting starts with an assessment of each surface, so the quote reflects the preparation needed as well as the area to be painted.
Interior and exterior work have different demands. Inside, the focus is on clean lines, protection of floors and furniture, and a finish suited to how the room is used. Outside, sun, heat, dust and humidity are harder on coatings, and access to walls at height must be planned. In both cases, damp patches, active leaks and significant cracks are assessed before painting, because covering them rarely lasts.
Suitable for owners landlords and property managers.
When it helps
What are you noticing?
Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.
Tired walls
Marks, scuffs, faded colour and patchy touch-ups that make rooms look worn. A full repaint of selected rooms can make the space feel fresh again.
Request a quotation for thisTenancy refresh
Between tenants, landlords often repaint walls, ceilings and woodwork to present the property well and cover the marks left from the previous occupancy before new residents arrive.
Request a quotation for thisExternal finish deterioration
Faded, chalky, flaking or cracked paint on external walls, boundary walls or parapets. Assessment checks the cause before the right exterior paint system is specified.
Request a quotation for thisColour change
Changing a room's colour, especially from a dark shade to a light one, often needs a primer or extra coats to achieve an even result without patches showing through.
Request a quotation for thisScope
What the assessed scope can include
The final scope depends on the assessment and is written into your quotation.
- 01
Surface assessment
The assessment can include checking walls, ceilings and woodwork for cracks, damp, stains, flaking and previous paint type, so preparation is planned correctly.
- 02
Protection
Work can include covering floors, furniture and fittings, masking edges and glazing, and removing or protecting switch plates and fixtures before painting starts.
- 03
Surface preparation
Preparation can include filling minor cracks and holes, sanding filler and rough patches, scraping loose paint and cleaning surfaces so the new coat adheres.
- 04
Priming and stain treatment
The scope can include priming bare or repaired areas and applying stain-blocking treatment where water marks or other stains may bleed through.
- 05
Paint application
Painting can include applying the specified number of coats of the agreed product and colour to walls, ceilings, doors or trims.
- 06
Cleanup
Completion can include removing protection, cleaning paint marks from adjacent surfaces such as floors and glass, and taking away debris and empty containers.
Price factors
What changes the quotation
Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.
- Paintable area
- Measured wall and ceiling area, not floor area, sets the main quantities of labour and paint.
- Surface condition
- Heavy filling, sanding and stain treatment take longer than painting surfaces that are already sound.
- Number of coats and colour change
- More coats, or a significant change of colour, increase both the paint quantity and the time needed.
- Paint product
- The brand, product type and finish, such as matt, satin or exterior-grade coatings, affect the material cost.
- Occupancy and access
- Occupied rooms, moving furniture and access to exterior walls at height all add to planning and labour.
- Woodwork and trims
- Doors, frames and skirting boards are often priced separately from walls because they take more careful work.
Key specification choices
- Paint system
- Brand, product type, sheen, primer and number of coats, recorded in the quotation.
- Colour schedule
- Colour references for each room or surface, agreed and confirmed before work starts.
- Preparation level
- The extent of filling, sanding and priming, stated so it can be compared across quotes.
Process
How the work is organised
Painting programmes depend on the area, surface condition, number of coats and drying time between them. Occupied homes are often painted room by room. Exterior work depends on weather, temperature and access, and very hot conditions can affect how some paints apply and cure. Building or community approval for exterior changes can also influence timing.
Assessment
Rooms or external walls are measured and surfaces inspected for cracks, damp, flaking and stains. Access needs for high walls and exteriors are noted, along with any areas that need investigation before painting.
Quotation
The quote states the paintable area, preparation, paint brand and product, colours, coats, protection, cleanup and exclusions, so it can be compared fairly against other offers for the same rooms or walls.
Work
Areas are protected and prepared, primed where needed and painted in the agreed sequence. In occupied homes, rooms are completed in stages so the property stays usable and bedrooms can be returned quickly.
Completion
Surfaces are checked for coverage and finish in good light, touch-ups are made, protection is removed and the area cleaned. Leftover paint can be labelled by room and left for future touch-ups if agreed.
A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.
Preparation
How to prepare
- List the rooms and surfaces to be painted, including ceilings and woodwork.
- Measure wall heights and lengths, or share floor plans, to estimate paintable area.
- Choose colours and finishes, or ask for guidance on suitable options.
- Photograph damp patches, cracks or stains so they can be assessed.
- Move small items, pictures and fragile objects out of the rooms.
- Check community or building rules on exterior colours and contractor hours.
Free checklist
Paint quantity and scope planner
Use these steps to estimate your painting scope and paint quantity before asking for a quote. The figures are indicative, not a confirmed price.
Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.
Advice
Useful reading before you enquire
Preparing rooms for interior painting
How to prepare rooms for interior painting: deciding the scope, checking surfaces, clearing rooms and recording paint products and colours in a quotation.
Read more GuideMeasuring wall and ceiling areas for planning
How to measure wall and ceiling areas for painting, subtract doors and windows, handle L-shaped rooms and estimate litres of paint, with worked examples.
Read more ProblemDamp patches before repainting
Painting over a damp patch rarely solves it. How to observe a damp wall safely, what may contribute and how to prepare before the area is repainted.
Read more ProblemPeeling wall paint
Paint that flakes, blisters or lifts from walls and ceilings usually has a reason. Safe checks, possible contributing factors and how to prepare for repainting.
Read moreCan you paint over damp patches?
Painting over damp usually fails, because moisture pushes the paint off and the stain returns. The source, such as a leak or failed waterproofing, needs identifying and resolving first. The assessment notes damp areas and recommends next steps before those surfaces are painted.
How do I measure paintable area?
Measure the length of each wall and multiply by its height, then subtract large openings such as windows and doors. Add ceiling areas separately. Floor area is not the same as wall area. The painting quantity planner can help you estimate.
How many coats will I need?
Two coats is common on sound surfaces of a similar colour, but bare plaster, repaired areas or strong colour changes may need a primer or extra coats to look even. The quote states the number of coats for each surface, so you can compare offers on the same basis.
Can I stay in my home during painting?
Yes, with planning. Rooms can be painted in stages, with protection and ventilation arranged for each one. Discuss how you use each room, including bedrooms and home offices, so the sequence keeps essential spaces available while the work is under way.
Related
Often arranged alongside
General property renovation
Agreed finishes and related technical alterations.
View serviceTile installation
Substrate assessment laying grouting and agreed finishing.
View serviceMove-in and move-out preparation
Agreed painting minor repairs servicing and selected cleaning.
View servicePart of renovation and finishes. See the full service directory.
Enquire
Request a painting quotation
Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.
Visit times and any assessment charge are confirmed before booking.