Guide
Preparing rooms for interior painting
How to prepare rooms for interior painting: deciding the scope, checking surfaces, clearing rooms and recording paint products and colours in a quotation.
By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For homeowners, tenants with landlord approval and landlords between tenancies
Good painting starts well before the first coat goes on. Most of the difference between a finish that lasts and one that looks tired within months comes from preparation: the right scope, sound surfaces and a room set up so the work can be done properly. Some of this is the painter’s job and some of it is yours. This guide explains both, so you can plan the work and compare quotations on the same basis.
Decide the scope room by room
Start by listing what you want painted in each room. Be specific, because “paint the apartment” can mean very different things.
- Walls: all walls, or a feature wall only?
- Ceilings: included or not? Ceilings in kitchens and bathrooms may need a different product.
- Doors and frames: both faces of each door? Frames only?
- Skirting and trims: included, and in what finish?
- Built-in items: wardrobes, radiator covers, shelving or panelling, if any.
Then decide on colours. Changing from a dark colour to a light one, or covering a strong colour, may need extra coats or a primer. Repainting in the same or a similar colour is usually simpler. Our guide to choosing paint finishes for different rooms covers sheen levels and where each works best.
If you rent, check with your landlord before changing colours. Many tenancy agreements say the property should be returned in its original colours.
Check the surfaces before booking
Walk round each room in good light and note anything that will affect the work.
- Damp patches or stains, especially near bathrooms, windows, AC units and external walls
- Peeling or flaking paint, which may point to moisture or poor adhesion of an earlier coat
- Cracks, noting whether they are fine hairline cracks or wider ones
- Holes from picture hooks, shelves, curtain rails and television brackets
- Marks and stains that may bleed through new paint, such as water marks, smoke or crayon
- Previous finish, if known, for example a glossy finish on woodwork
Damp patches, active leaks and significant cracks should be investigated before repainting. Painting over a damp wall usually means the new paint fails in the same place. Our page on a damp wall before painting explains what to check first. Fine cracks and small holes are normally part of surface preparation, but wider or recurring cracks may need assessment.
Preparing the room
Agree in advance who does what. Some quotations include moving furniture and removing wall fixings; many do not.
Before the painters arrive, you may need to:
- move small items, ornaments, books and electronics out of the room
- take down pictures, mirrors and curtains, or agree that they will be removed as part of the job
- empty built-in wardrobes or cupboards if their interiors or doors are being painted
- clear a path through the property for equipment and materials
- arrange for pets and children to be kept away from work areas
Larger furniture can often be moved to the centre of the room and covered. Agree who moves it, who covers it and who puts it back.
Wall fixings such as shelves, brackets and curtain rails need a decision: remove and refit, remove and fill the holes, or leave in place and paint around them. Each gives a different result.
AC units, light fittings and switches should be protected or masked. Ask how this will be handled.
What surface preparation should include
The painter’s preparation work is where quality is decided. A clear scope should describe:
| Preparation step | What it means |
|---|---|
| Protection | Floors, furniture, fittings and adjacent surfaces covered or masked |
| Cleaning | Dust, grease and loose material removed so paint adheres |
| Filling | Holes and minor cracks filled and sanded smooth |
| Sanding | Glossy or rough surfaces lightly sanded to help adhesion |
| Spot priming | Filled areas, stains and bare patches primed |
| Full priming | Needed for new plaster, strong colour changes or some stains |
| Masking | Clean lines at ceilings, frames and fittings |
| Clean-up | Protection removed, waste taken away, rooms left tidy |
Not every room needs every step. Ask which ones are included for your property and why. Kitchens may need extra cleaning to remove grease before painting, and bathrooms may need attention to any mould staining and to failed sealant around baths and basins, which is a separate item from the paintwork itself. Woodwork that was previously finished in a glossy paint usually needs sanding before a new coat will hold well.
Living in the property during painting
If the home is occupied, plan the order of rooms so you always have somewhere to sleep and a usable kitchen and bathroom. Painting one or two rooms at a time is usually easier to live with than doing everything at once.
Ask which products will be used and check the manufacturer’s information on drying, recoating and ventilation. Keep windows open where practical and follow any advice on when rooms can be used again. If anyone in the household is sensitive to odours, mention it when you enquire so product choices can be discussed.
Record it in the quotation
To compare quotations properly and to make future touch-ups easy, the written proposal should record:
- The rooms and surfaces included
- Paint brand and product for each surface
- Colour names and codes
- Number of coats
- Preparation included, using the steps above
- Furniture moving and wall fixings, included or excluded
- Protection and clean-up
- Any repairs to be quoted separately, such as damp investigation
Keep a copy of the colour codes and products for later. They make future touch-ups much easier.
Next step
Estimate your wall and ceiling areas and paint quantities with the painting quantity planner, then share your room list and photographs when you enquire. The painting page explains how preparation, products and coats are scoped and quoted.