Guide

Planning a rental property refresh

Plan a refresh between tenancies: set the goal, record condition room by room, put function before cosmetics, and arrange access and approvals early.

By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For landlords, property investors and managers preparing rental homes

The period between tenancies is often the only time a rental home is empty, so it is the natural moment to catch up on maintenance and improve the property’s condition. It is also usually a short window. A refresh that is planned before the outgoing tenant leaves is far more likely to be finished on time than one that starts with a walk-through on the day the keys come back.

This guide explains how to set the goal of a refresh, record the property’s condition, prioritise the work and organise access, particularly if you manage the property from a distance.

Decide what the refresh is for

A refresh means different things to different landlords. Being clear about the goal keeps the scope and budget under control.

  • Restore the previous condition. Repair damage, touch up or repaint walls, replace worn sealant, service equipment and clean, so the property is ready for the next tenancy in the same condition as before.
  • Prepare for re-letting. As above, plus improvements that help the property present well, such as fresh paint throughout, new light fittings or replacement handles.
  • Upgrade selected items. Replace an outdated kitchen worktop, renew flooring in one room or upgrade a bathroom. These items usually need more time and may not fit the gap between tenancies.

Write the goal at the top of your brief. It helps anyone quoting to understand what level of work you expect.

Record condition room by room

A condition record is the foundation of the scope. Walk through the property, ideally before the outgoing tenant leaves and again after, and record each room in the same order.

For each room, note:

  • Walls and ceilings: marks, holes from fixings, cracks, damp patches or peeling paint.
  • Floors: damage, lifting, cracked tiles, worn areas.
  • Doors and windows: hinges, handles, locks, alignment, seals.
  • Electrical: lights not working, damaged switches or sockets. Note them, do not open them.
  • Plumbing: dripping taps, running toilets, slow drains, signs of past leaks.
  • AC: when it was last serviced, any noise, leaks or weak airflow reported.
  • Kitchen: cabinet doors, hinges, worktop condition, appliance condition.
  • Bathrooms: grout, sealant, fixtures, extract fan.

Take photographs of each wall and each defect, with a note of the room. These photographs help with quotations, with remote approvals and with the next check-in record. If you notice damp before repainting, the page on damp patches before repainting explains why it should be looked at before it is covered.

Prioritise the work

Not every item needs doing every time. Sorting the list helps when time or budget is limited.

Priority Examples Why
Safety and function Electrical faults, leaks, AC not cooling, faulty locks Affects use of the home and should be addressed before a new tenancy
Wear and tear Worn sealant, loose hinges, marked walls, dripping taps Prevents gradual deterioration and keeps the home in good order
Presentation Full repaint, new light fittings, replacement handles Helps the property present well for re-letting
Improvement New flooring, worktop replacement, bathroom upgrade Adds value but needs more time and planning

Recurring issues reported during the tenancy, such as an AC unit that leaked twice or a drain that keeps blocking, deserve attention even if they seem fine on the day. They are likely to come back.

Typical refresh items

A typical refresh between tenancies might combine several of these, depending on the condition record:

  • Filling and repainting walls and ceilings, with the paint colour and product recorded for future touch-ups.
  • AC servicing or cleaning, and checking condensate drains.
  • Replacing worn silicone in kitchens and bathrooms, and regrouting where needed.
  • Repairing dripping taps, running toilets and slow drains.
  • Replacing failed light fittings, switch plates and damaged sockets.
  • Adjusting doors, hinges, locks and cabinet doors.
  • Removing old fixings and making good.
  • A final clean.

Combining these into one coordinated visit or short programme is often simpler than booking separate trades. The move-in and move-out preparation service is designed around exactly that kind of combined scope. A refresh can help the next handover go well, but it cannot settle questions about deposits or tenancy disputes, which are a matter between landlord and tenant.

Access, approvals and remote management

Plan the practical side early, especially if you are not in Dubai or not able to attend.

  • Building rules. Ask building management about working hours, contractor registration, lift bookings and debris removal. Some buildings require approval or a work permit before contractors can attend.
  • Keys and access cards. Arrange who holds keys and access cards, and how they are handed over and returned.
  • Utilities. Confirm that power and water are connected during the work, as many tasks need them.
  • Approvals at a distance. Agree how you will approve the quotation, any additional work found on site and the completion check, for example by photographs and written confirmation.
  • Timing. Allow time between the end of the old tenancy and the start of the new one. The duration of the work is confirmed after assessment and depends on scope and access.

Questions to ask in the quotation

  • Which items from my condition record are included, and which are excluded?
  • Are materials, such as paint, sealant and replacement fittings, included?
  • What paint product and colour will be used, and will it be recorded?
  • How will additional defects found during the work be reported and approved?
  • Will I receive before and after photographs?
  • Is a final clean included?

Next step

Work through the landlord handover checklist to build your room by room condition record and priorities. Then share it with photographs through the apartment maintenance service page so the refresh scope can be assessed and quoted for approval.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us