Common problem
Damp patches before repainting
Painting over a damp patch rarely solves it. How to observe a damp wall safely, what may contribute and how to prepare before the area is repainted.
A damp patch on a wall or ceiling is often the reason a room needs repainting, but it is also the reason that repainting alone may not last. If moisture is still reaching the surface, new paint can stain, blister or peel again. This page helps you observe the damp safely, think about what may be contributing and prepare for an assessment before the area is decorated. It is not a diagnosis, and health effects of damp are outside its scope.
What you might notice
- A darker patch or tide mark on a wall or ceiling.
- Paint that is bubbling, flaking or feels soft.
- A patch that changes size, sometimes growing after showers, rain or AC use.
- Salt deposits or white powder on the surface.
- A musty smell in the room or a cupboard.
- Skirting boards, door frames or flooring near the patch that are swelling or stained.
Possible contributing factors
These are common contributors to damp patches. They are listed to help you describe what you see and do not identify the source.
- Plumbing leaks. A leaking pipe, fitting or waste connection in the wall, floor or ceiling can cause damp nearby.
- AC condensation. Drain issues or uninsulated pipework from AC units can lead to damp on ceilings and walls.
- Bathroom and wet area seals. Failed grout, sealant or waterproofing around showers and baths can let water travel into adjacent walls.
- External water ingress. Roofs, terraces, balconies, windows and external walls can allow water in during rain or cleaning.
- Condensation. Warm, humid air meeting a cooler surface can leave moisture, often in poorly ventilated rooms.
- Neighbouring properties. In apartments, the source may be in another unit or a shared area.
Safe checks before you enquire
These checks are observational. Do not cut into walls, remove ceiling boards or work at height.
- Photograph the patch and mark its edge lightly with a pencil and the date, so you can see whether it grows.
- Note when the patch looks worse, for example after showers, rain, washing a balcony or running the AC.
- Check what is on the other side of the wall or above the ceiling, such as a bathroom, kitchen, balcony or AC unit.
- If a water meter is accessible, you can note the reading when no water is in use and check it again later. A change may point to a leak.
- Keep electrical appliances away from the damp area and do not touch fittings that are wet.
- In an apartment, let building management or the neighbouring occupant know if the source may lie with them.
Information that helps the assessment
- The location and size of the patch, and photographs taken over time.
- What sits above, behind or next to the area.
- Whether the patch is linked to particular activities or weather.
- Any previous repairs, repainting or leak history.
- The finish you would like once the cause has been addressed.
- Building management contacts and access arrangements.
The painting quantity planner can help you plan the redecoration once the source is understood.
Which service fits
Damp patches, active leaks and significant cracks should be investigated before repainting. Where water ingress through a bathroom, balcony, terrace or roof is suspected, waterproofing and leak rectification can be discussed, starting with identifying the likely entry path. If a pipe or fitting is the likely source, plumbing maintenance is the place to start. Once the cause has been addressed and the surface has dried, interior and exterior painting can restore the finish with suitable preparation and primer. Share your location when enquiring; visit times are confirmed when you book.
Enquire
Describe what you are seeing
Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.
Visit times and any assessment charge are confirmed before booking.