Air conditioning
Cooker hood installation
Installation and replacement of domestic cooker hoods for kitchen owners and renovators, with the ventilation type, mounting, clearances and compatible connections checked before the hood goes up.
Scope and charges are agreed in writing before work starts.
SCOPE
Domestic hood mounting and compatible connections.
BOUNDARY
Commercial grease extraction and gas work are separate.
Overview
What cooker hood installation covers
A cooker hood has to fit three things at once: the space above the hob, the kitchen's ventilation arrangement and the electrical supply. A hood designed to duct air outside will not perform as intended if it is connected to nothing, and a recirculating hood needs the right filters to do its job. Classic Apex checks the model you have chosen against the kitchen before mounting, so the installation suits both the hood and the room.
Many replacement jobs are straightforward when the new hood matches the existing outlet and mounting position. Others reveal that the cabinet above is too low, the duct diameter differs, or there is no suitable socket nearby. Identifying these points at the enquiry stage, ideally from photographs and the model number, avoids an installation day spent waiting for extra parts.
Suitable for domestic kitchen owners and renovators.
When it helps
What are you noticing?
Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.
New hood for a new kitchen
Your kitchen renovation includes a new hob and hood. Installation can be coordinated with cabinet fitting so the mounting and duct route are planned before the cabinets close the space.
Request a quotation for thisReplacing an old hood
The existing hood is noisy, ineffective or broken. A replacement can often reuse the outlet and mounting position, subject to the new hood's dimensions and connection compatibility.
Request a quotation for thisMounting or connection problems
A hood bought online that needs fitting, a hood that has come loose, or an existing hood not connected to its outlet. Each needs checking before work proceeds.
Request a quotation for thisScope
What the assessed scope can include
The final scope depends on the assessment and is written into your quotation.
- 01
Compatibility check
The assessment can include confirming whether the hood is designed for external extraction or recirculation, checking its dimensions and reviewing the manufacturer's installation requirements.
- 02
Removal of the old hood
Where agreed, the work can include disconnecting and removing the existing hood and its fixings, with disposal stated in the quote.
- 03
Mounting
Installation can include fixing the hood to the wall, chimney bracket or cabinet base at a suitable height above the hob, following the manufacturer's clearance guidance.
- 04
Duct connection
The scope can include connecting the hood to an existing suitable outlet using compatible duct and fittings, sealed at the joints.
- 05
Recirculation setup
For recirculating hoods, the work can include fitting the supplied carbon filters and diverter, so air is filtered and returned to the room.
- 06
Testing
Completion can include testing each fan speed, the lighting and controls, and checking for vibration or air leakage at the duct connections.
Price factors
What changes the quotation
Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.
- Hood type
- Wall chimney, integrated, island and under-cabinet hoods differ in mounting complexity, fixings and installation time.
- Existing outlet
- A matching existing outlet is simpler than adapting duct sizes or extending a duct run.
- Cabinet work
- Cutting cabinets for duct passage or adjusting cabinet heights to clear the hood adds to the scope.
- Power supply
- A suitable existing socket or connection point keeps the job simple; anything new is assessed separately.
- Removal and disposal
- Taking away the old hood is a separate line that you can include or exclude.
Key specification choices
- Extraction or recirculation
- Confirmed against the model and the kitchen's existing outlet, since the two types need different setups and filters.
- Duct size and route
- The duct diameter matches the hood outlet, with the shortest practical route and minimal bends to the existing outlet.
- Mounting height
- Set within the manufacturer's guidance for the hob type, balancing performance with headroom.
Process
How the work is organised
Most of the planning time goes into confirming compatibility. Once the model, outlet and mounting position are known, scheduling depends on whether duct parts or cabinet adjustments are needed and, in renovation projects, on when cabinets and worktops are installed. Coordinating the hood with cabinet fitting avoids reopening finished joinery.
Assessment
The hood model, photographs and measurements are reviewed to confirm extraction or recirculation, mounting fit, outlet compatibility and power. A visit is arranged if dimensions or the outlet are unclear.
Quotation
The quote states removal, mounting, the duct or recirculation setup, any cabinet adjustments and the exclusions, such as gas work, shared shaft connections or new electrical circuits, so the boundary is clear.
Work
The hob and worktops are protected, the old hood is removed if agreed, and the new hood is mounted, connected and sealed in line with its installation instructions and the agreed position.
Completion
Fan speeds, lights and controls are tested and duct joints checked for leakage. You are shown how to remove and clean the filters, and the kitchen is tidied before the visit ends.
A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.
Preparation
How to prepare
- Share the hood make and model, or the product page.
- Photograph the hob area, the existing hood and any outlet on the wall or ceiling.
- Measure the width of the hob and the space between hob and cabinets above.
- Note whether the existing outlet leads outside or into a shared shaft, if known.
- Check where the nearest socket is to the hood position.
- Clear worktops and the hob area.
Free checklist
Cooker hood compatibility checklist
Check these points before buying or booking installation of a cooker hood. They cover the most common reasons a hood does not fit as expected.
Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.
Advice
Useful reading before you enquire
Cooker hood installation questions
Before fitting a cooker hood, check ducted or recirculating use, the outlet, mounting, power supply and cabinet clearances, and what a quote should cover.
Read more GuidePlanning a kitchen renovation brief
Build a kitchen renovation brief: what to change, what to measure, how appliances and services affect layout, and what to ask before approving a quote.
Read moreCan I convert a recirculating hood to extraction?
Some hoods can be configured either way, while others are designed for one mode only. Extraction also needs a suitable outlet to the outside or an approved shaft. Share the model so its options can be checked, along with photographs of any existing outlet.
Can you connect my hood to the building's kitchen shaft?
Connections to shared shafts can affect other residents and are often controlled by building management. Any such connection needs separate assessment and approval. If an existing connection is already in place and suitable, the new hood can usually be connected to it.
Do you install restaurant extraction hoods?
No. Commercial kitchen extraction, grease ducts and fire suppression are specialist systems with their own design, installation and maintenance requirements. This service covers domestic cooker hoods only. For restaurant premises maintenance, the restaurant annual maintenance contract (AMC) lists these systems as separate specialist scope.
What height should my hood be above the hob?
The manufacturer's installation guide gives a height range that depends on the hob type, and gas and induction hobs often have different recommendations. The installation follows that guidance while taking account of headroom, the cabinets either side and your own height.
Related
Often arranged alongside
Kitchen renovation
Agreed cabinets finishes and related plumbing or electrical work.
View serviceKitchen cabinet installation
Specified cabinets fitting hardware and agreed adjustments.
View serviceElectrical installation
Assessed fixtures wiring and suitable power connections.
View servicePart of air conditioning. See the full service directory.
Enquire
Request a cooker hood installation quotation
Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.
Visit times and any assessment charge are confirmed before booking.