Electrical
Lighting and smart control upgrades
A service for owners planning better lighting layouts, replacement fittings or a new thermostat, where each product is checked for compatibility with the existing wiring and AC control system before installation.
Scope and charges are agreed in writing before work starts.
SCOPE
Assessed fittings controls and compatible installation.
BOUNDARY
No guaranteed energy savings or universal smart thermostat fit.
Overview
What lighting and smart control upgrades covers
Lighting upgrades range from swapping dated fittings for LED downlights to rethinking where light falls in a room, adding dimming or separating circuits so a kitchen or living area can be lit in zones. Smart thermostats and controllers promise convenience, but only work properly when they suit the AC system and the wiring behind the wall. This service starts with those checks.
Classic Apex can assess existing fittings, switch arrangements and AC controls, and suggest compatible options. Not every smart thermostat suits every AC system, and some controls are proprietary to the equipment manufacturer. Energy use depends on many factors, so no particular saving is promised without an assessment specific to the property.
Suitable for owners planning compatible lighting or thermostat changes.
When it helps
What are you noticing?
Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.
A lighting upgrade
Fittings are dated, yellowed or failing, you want warmer or brighter light, or you would like dimmable LED downlights, pendants or feature lighting in specific rooms.
Request a quotation for thisAn inefficient layout
Rooms have a single central light that leaves corners dark, kitchen worktops sit in shadow, or switches are in awkward places that do not match how the space is used.
Request a quotation for thisThermostat replacement
The AC thermostat is faulty, hard to read or limited, and you are considering a programmable or smart controller that suits your system and the way you live.
Request a quotation for thisScope
What the assessed scope can include
The final scope depends on the assessment and is written into your quotation.
- 01
Existing system review
The assessment can include checking existing fittings, switch positions, circuit arrangements and ceiling conditions, and identifying any wiring concerns that would affect an upgrade.
- 02
AC control compatibility check
For thermostat changes, the scope can include identifying the AC system type, existing controller model and wiring, then confirming which replacement products are compatible.
- 03
Layout recommendations
Advice can include suggesting fitting positions, spacing, colour temperature and zoning for each room, based on how the space is used.
- 04
Fitting replacement
Installation can include removing old fittings and installing agreed new ones, such as LED downlights, pendants or wall lights, on suitable existing circuits.
- 05
Switching and dimming
The scope can include replacing switches with compatible dimmers or multi-way switching, provided fittings and drivers are rated for dimming.
- 06
Thermostat installation
Where compatibility is confirmed, work can include fitting the chosen thermostat, connecting it to the existing control wiring and testing operation with the AC system.
Price factors
What changes the quotation
Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.
- Number of fittings
- The total count of downlights, pendants and wall lights sets most of the labour and material cost of a lighting upgrade.
- Ceiling type
- Gypsum ceilings make new downlight positions easier to cut than concrete ceilings, which may need surface fittings or other approaches.
- Control complexity
- Simple switches cost less than dimming, multi-way switching or smart switches, which need compatible drivers and wiring.
- Thermostat type
- Basic programmable thermostats differ from smart, connected controllers, and some AC systems need manufacturer-specific interfaces.
- Product supply
- Whether fittings and controllers are supplied by you or sourced through the quotation affects the overall price.
Key specification choices
- Fitting rating and colour
- Agree lumen output, colour temperature and beam angle for each area so rooms feel consistent.
- Dimmer and driver matching
- Pair dimmers with compatible LED drivers to avoid flicker, buzzing or reduced lifespan.
- Controller compatibility
- Confirm the thermostat suits the AC type, control voltage and wiring before purchase.
Process
How the work is organised
Scheduling depends on product availability, the number of fittings, whether new ceiling openings are needed and coordination with painting or ceiling work. Thermostat replacement waits on compatibility confirmation and product delivery. Working in occupied rooms usually means one area at a time. The proposed plan is confirmed with the quotation.
Assessment
Fittings, switches, circuits and ceilings are reviewed, and AC controls are examined to identify the system type and wiring. The way each room is used is discussed so upgrades suit daily routines.
Quotation
The quotation sets out fitting quantities and types, switching and dimming, thermostat model and compatibility findings, product supply, making good around ceilings and exclusions such as new circuits or central AC controls.
Work
Circuits are safely isolated before old fittings are removed. New fittings, switches and dimmers are installed, and any agreed thermostat is connected to the existing control wiring and set up for basic operation.
Completion
Lighting is tested on every switch and dimmer setting, and the thermostat is checked with the AC system running. You are shown how to use new controls, and product information is handed over.
A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.
Preparation
How to prepare
- Count the existing fittings in each room and photograph them.
- Photograph the thermostat front and, if it can be seen safely, any label.
- Mark where light is lacking or switches are inconvenient.
- Note the ceiling type in each room if known.
- List any smart products you are considering, with model names.
Free checklist
Lighting and control compatibility brief
Gather these details before planning lighting or thermostat changes so compatibility can be checked first.
Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.
Advice
Useful reading before you enquire
Planning additional sockets and fittings
How to plan extra sockets, switches and light fittings: positions, heights, connected load, cable routes, approvals and what the quotation should define.
Read more ProblemAC thermostat concerns
A blank display, wrong readings or an AC that ignores its thermostat? Safe checks to make, possible contributing factors and what to share when enquiring.
Read more ProblemFlickering lights
Lights that flicker, dim or buzz can relate to a lamp, driver, dimmer or wiring. Safe checks to make, what may contribute and what to share when enquiring.
Read moreWill a smart thermostat work with my AC?
It depends on the AC type, control voltage and wiring. Some systems accept standard thermostats, others use proprietary controllers that only work with the manufacturer's own products or approved interfaces. Share the system and existing controller details so compatibility can be checked before you buy anything.
Will LED lighting reduce my electricity bill?
LED fittings generally use less power than older types for similar light, but the effect on your bill depends on how many fittings change, how long they run and other loads in the property. No specific saving can be promised without a property-specific assessment.
Can downlights be added to a concrete ceiling?
Recessed downlights need a void, which concrete ceilings usually lack. Options include surface-mounted fittings, track lighting or forming a gypsum bulkhead to create space. The assessment explains which approach suits each room, including how a bulkhead would affect ceiling height and whether it could also hide cables or AC ducts.
Why do some LED lights flicker on dimmers?
Flicker often comes from a mismatch between the dimmer and the LED driver, or from fittings not rated for dimming. Choosing compatible dimmers and dimmable fittings together avoids most issues. Product details, including the dimmer's minimum load and the driver type, should be checked before installation.
Related
Often arranged alongside
Electrical installation
Assessed fixtures wiring and suitable power connections.
View serviceAC maintenance and repair
Inspection accessible component checks and quoted repairs.
View serviceGypsum ceilings and partitions
Specified boards framing finishes and service coordination.
View servicePart of electrical. See the full service directory.
Enquire
Request a lighting and smart control upgrades quotation
Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.
Visit times and any assessment charge are confirmed before booking.