General and external works

External pressure washing

A cleaning service for villa owners and managers of external areas, washing dirty interlock, patios, pool surrounds and suitable outdoor surfaces with pressure and method chosen for each material.

Request a quotation

Scope and charges are agreed in writing before work starts.

Half-cleaned interlock driveway showing a clear contrast between washed and unwashed pavers

SCOPE

Assessed surface washing with matched pressure and method.

BOUNDARY

Not all stone coatings and facades tolerate the same pressure.

Overview

What external pressure washing covers

Outdoor surfaces collect sand, dust, tyre marks, leaf staining, algae in shaded corners and residue from irrigation water. Pressure washing can lift much of this, but the same force that cleans a concrete driveway can etch soft stone, strip coatings, blow out jointing sand or drive water behind cladding. Classic Apex matches the pressure, nozzle and any cleaning product to the surface.

Classic Apex can assess the surfaces, their finishes and condition, nearby drainage and water access before suggesting a method. Some materials suit lower pressure with a softer approach, and some coated stone or facade finishes may not suit pressure washing at all. Where that is the case, the assessment says so rather than risking damage.

Suitable for villa owners and external area managers.

When it helps

What are you noticing?

Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.

Dirty paving

Interlock driveways and paths have turned grey or patchy with dust, tyre marks, oil spots or dark staining, and sweeping no longer brings back the original colour.

Request a quotation for this

Patio and terrace residue

Patio tiles, pool surrounds or terrace floors have a film of dirt, hard water marks or algae in shaded areas that make them look tired and feel slippery.

Request a quotation for this

Suitable surface cleaning

Boundary walls, steps, outdoor seating areas or bin stores need cleaning before an event, a sale or a handover, and you want to know which surfaces can be washed safely.

Request a quotation for this

Scope

What the assessed scope can include

The final scope depends on the assessment and is written into your quotation.

  1. 01

    Surface assessment

    The assessment can include identifying each surface material, its finish or coating, its condition and joints, and nearby features that could be affected by water or spray.

  2. 02

    Method selection

    The scope can include choosing pressure level, nozzle type, distance and whether a surface cleaner attachment or suitable detergent is needed for each area.

  3. 03

    Protection of surroundings

    Preparation can include covering or moving outdoor furniture, protecting plants, doors and electrical points, and planning where runoff will drain.

  4. 04

    Washing

    Work can include washing agreed surfaces section by section, working towards drainage points so dirty water does not flow back over cleaned areas.

  5. 05

    Joint care on interlock

    For interlock, the scope can include controlling pressure and angle to limit jointing sand loss and, where agreed, re-sanding joints once the surface has dried.

  6. 06

    Final rinse and check

    Completion can include rinsing residue from adjoining walls and steps, checking cleaned areas for missed patches or marks and leaving the site tidy.

Price factors

What changes the quotation

Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.

Area to clean
The total square metres of driveway, paths, patios and walls set the base time for washing and rinsing the outdoor areas.
Surface type
Robust concrete and interlock can be cleaned faster than delicate natural stone or textured finishes needing a gentler approach.
Level of soiling
Light dust lifts quickly, while years of algae, tyre marks or hard water deposits need more passes or pre-treatment.
Water and drainage
Limited water supply, long hose runs or poor drainage add set-up time and may limit methods available.
Re-sanding and extras
Re-sanding interlock joints, moving heavy planters or furniture and protecting delicate landscaping are additional items listed separately.

Key specification choices

Pressure and nozzle
Set pressure and nozzle for each surface, testing a small area first where the material is unknown.
Cleaning products
Use any detergent only where suited to the surface and surroundings, following product guidance.
Water management
Plan runoff towards suitable drains and avoid directing water at doors, windows or electrical points.

Process

How the work is organised

Scheduling depends on the area, surface types, level of soiling and water access. Cooler parts of the day can be more comfortable for outdoor work and allow surfaces to dry evenly. Interlock re-sanding needs dry joints, which may mean a short wait after washing. The proposed timing is agreed with the quotation.

  1. Assessment

    Surfaces are identified and examined for finish, coating, condition and joints, and water access and drainage are checked. Areas that should not be pressure washed are flagged at this stage with alternative suggestions where possible.

  2. Quotation

    The quotation lists each surface and area, the method and pressure approach, protection measures, any detergent use, re-sanding of interlock if wanted and exclusions such as stain treatment and work at height.

  3. Work

    Surroundings are protected and a test patch is cleaned where needed. Surfaces are then washed in sections towards drainage, with pressure adjusted for each material and joints treated carefully on interlock.

  4. Completion

    Adjoining areas are rinsed, the site is checked for missed spots or marks, protection is removed and furniture can be replaced. Any surface that would benefit from sealing or repair is noted for you.

A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.

Preparation

How to prepare

  • Photograph each surface to be cleaned and note the material if known.
  • Measure or estimate the area of driveways, paths and patios.
  • Locate the outdoor tap and nearest drains.
  • Move vehicles, furniture and planters where possible.
  • Switch off and cover outdoor sockets in the work area if safe to do so.

Free checklist

External surface cleaning scope planner

Use this planner to list the outdoor surfaces you want cleaned and the details that affect the method.

Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.

Go further with the maintenance planner

FAQs

External pressure washing: common questions

Ask about your property
Can pressure washing damage my paving?

It can if the pressure, nozzle or distance is wrong for the material. Soft stone can etch, coatings can strip and interlock can lose jointing sand. That is why methods are matched to each surface, with test patches where materials are uncertain, and some surfaces may be excluded.

Will all stains come out?

General dirt and algae usually lift well, but oil, rust and some deep tyre marks may only fade. These may need specialist treatment, which is not part of standard washing. The assessment notes stubborn stains and their locations so expectations are clear before the visit is booked.

Do interlock joints need re-sanding afterwards?

Often some jointing sand is lost during washing, especially on older paving. Re-sanding helps lock pavers in place and reduces weed growth. It can be added to the scope and is best done once the surface is fully dry, so the sand flows into the joints properly.

Can you wash my villa walls?

Low-level boundary walls and robust finishes may be suitable, depending on the material and coating. Painted, textured or cladded facades may not tolerate pressure, and high-level areas need work-at-height arrangements outside this scope. The assessment confirms which walls can be included.

Enquire

Request a external pressure washing quotation

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us