Electrical

Electrical installation

Planned electrical installations for property owners and renovation customers, covering new lighting, extra sockets and power connections for fixtures or equipment, assessed against the existing system first.

Request a quotation

Scope and charges are agreed in writing before work starts.

Recessed ceiling downlights and a pendant light in a living space

SCOPE

Assessed fixtures wiring and suitable power connections.

BOUNDARY

Capacity and approvals must be assessed before new circuits.

Overview

What electrical installation covers

Adding a socket by the bed, pendant lights over a dining table or a dedicated supply for a new appliance all start with the same questions: can the existing circuit take the extra load, how will the cable reach the new position and what will need to be opened and made good? Classic Apex electrical installation begins with these checks, so the work is planned around what your property's system can safely support.

Where the existing circuits are suitable, many additions can be made by extending them with appropriate protection. Where they are not, a new circuit or distribution board change may be needed, and that is assessed separately, with any approvals and testing identified before work starts. In renovation projects, electrical work is coordinated with ceilings, painting and joinery so cables are in place before finishes close the walls.

Suitable for property owners and renovation customers.

When it helps

What are you noticing?

Choose the closest description to see what it usually means for the request. This is guidance, not a diagnosis.

New lighting

Adding downlights, pendants, under-cabinet lights or external lights, or changing a single central fitting to a layout of several. Positions, switching and fitting types are agreed before cabling.

Request a quotation for this

Extra sockets

Rooms with too few sockets, extension leads trailing across floors, or new desks, televisions and kitchen appliances that need power in different places from the existing outlets.

Request a quotation for this

Equipment power requirement

A new oven, water heater, AC unit or workshop tool that needs a suitable supply. The load and existing circuit capacity are checked before connection.

Request a quotation for this

Scope

What the assessed scope can include

The final scope depends on the assessment and is written into your quotation.

  1. 01

    Load and circuit assessment

    The assessment can include identifying which circuit would supply the new item, checking existing load and confirming whether capacity and protection are suitable.

  2. 02

    Cable route planning

    Planning can include choosing routes through ceilings, walls or trunking, considering finishes, other services and how much making good is involved.

  3. 03

    Lighting installation

    Work can include installing new light fittings, switches and dimmers that are compatible with the lamps chosen, in the positions agreed on your plan.

  4. 04

    Socket installation

    The scope can include adding sockets and outlets on suitable existing circuits, with face plates matched to existing accessories where possible.

  5. 05

    Equipment connections

    Installation can include connecting fixed equipment to a suitable supply point, such as a fused connection unit or isolator, as the equipment requires.

  6. 06

    Testing

    Completion can include testing appropriate to the installation, such as continuity, insulation resistance and protective device operation, before the new items are handed over.

Price factors

What changes the quotation

Classic Apex does not publish fixed prices for this service. Each quotation is based on the actual work, separating labour, materials, access equipment, disposal and applicable taxes.

Number of items
The quantity of lights, sockets and connections is the starting point for labour and materials.
Cable route
Routes through accessible ceilings are simpler and quicker than chasing solid walls or running surface trunking.
Circuit capacity
Extending an existing circuit costs less than adding a new circuit with its own protection.
Fittings and accessories
Decorative fittings, smart switches or premium accessory ranges usually cost more to buy and fit than standard items.
Finish needs
Making good, repainting and coordinating with ceiling or joinery work all add to the scope.

Key specification choices

Circuit choice
Whether the item joins an existing circuit or needs a new one, based on load, cable size and protection.
Accessories
Switch and socket ranges, finishes and heights agreed in advance, including any customer-supplied fittings.
Concealed or surface wiring
Cables chased into walls, run through ceilings or installed in surface trunking, depending on finish and access.

Process

How the work is organised

Planning depends on the number of items, cable routes, whether new circuits or approvals are required and availability of chosen fittings. In renovation projects, electrical work usually happens in two stages: first-fix cabling before ceilings and walls are finished, then second-fix fittings after painting. Coordinating with other trades affects overall scheduling.

  1. Assessment

    Your list and photographs are reviewed first. On site, the distribution board, the existing circuits and each proposed position are checked for load, capacity, cable routes and any finishes that would be disturbed.

  2. Quotation

    The proposal states each item, the circuit approach, cable routes, fittings and making good. Where new circuits or approvals are involved, these are flagged for separate assessment before anything is installed.

  3. Work

    Circuits are safely isolated, cables are routed and installed, and fittings, sockets and connections are made in the agreed positions. Any change to positions on the day is confirmed with you first.

  4. Completion

    Testing appropriate to the work is carried out and every new item is demonstrated working. The area is cleaned, and any agreed making good is completed or scheduled around your other trades.

A preferred visit time is a request. It becomes an appointment only once Classic Apex confirms it.

Preparation

How to prepare

  • List each item you want installed and where, with a rough sketch or marked photographs.
  • Note the rating label of any equipment needing power.
  • Decide whether you want switches and sockets to match existing ones.
  • Photograph the distribution board and its labels.
  • Tell us about planned ceiling, painting or joinery work so electrical work can be coordinated.

Free checklist

Electrical fitting and location planner

Plan new lights, sockets and connections room by room before asking for a quote. A clear list leads to a more accurate assessment.

Tick what applies and add notes. Nothing is sent anywhere until you choose to request a quotation.

Go further with the project brief

FAQs

Electrical installation: common questions

Ask about your property
Can I add sockets without a new circuit?

Often yes, if the existing circuit has spare capacity and suitable protection. The assessment checks this. If the circuit is already heavily used, or the new item needs its own supply, a new circuit may be recommended and assessed separately.

Do I need approval for electrical work?

It depends on the property, the building and the scope of work. Some buildings and landlords require notice or approval before electrical alterations. Check with your building management or the relevant authority whether approvals are needed before work begins, and share any conditions they set.

Will walls be damaged during installation?

Concealed wiring in solid walls usually involves chasing a channel, which then needs filling and repainting. Routes through accessible ceilings or surface trunking reduce this disturbance. The quote explains the chosen route and states clearly whether making good is included.

Can you install lights I bought online?

Yes, if they are suitable for the location and compatible with the switching and supply. Share the product details before purchase if possible, so the fixing method, weight, ceiling type and dimmer compatibility can be checked and any extra parts identified.

Enquire

Request a electrical installation quotation

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us