Guide

Creating a building maintenance asset list

Build a maintenance asset list for a building: what to include, which fields to record, how to mark specialist systems and how it supports PPM and AMC.

By the Classic Apex team · Updated 22 October 2026 · About 5 minutes to read · For building owners, property managers and owners' associations

A building maintenance asset list, sometimes called an asset register, is a structured record of the equipment and building elements that need maintaining. It answers simple but important questions: what do we have, where is it, what condition is it in, and who looks after it? Without one, maintenance tends to become reactive, quotations are hard to compare, and specialist systems can be overlooked.

You do not need specialist software to start. A spreadsheet with consistent columns is enough for many buildings, and it can grow as information improves.

What to include

Include anything that needs inspection, servicing, repair or eventual replacement. Organise the list by system or by location, whichever suits the building. Common categories include:

  • Air conditioning: split units, fan coil units, ducted units, condensers and any controls in common areas or units within scope.
  • Electrical: distribution boards, common area lighting, external lighting, emergency lighting fittings and timers.
  • Plumbing: water tanks, transfer and booster pumps, water heaters, valves and common area washrooms.
  • Drainage: floor drains, gullies, inspection chambers and any pumped drainage.
  • Building fabric: doors and ironmongery, ceilings, floor and wall finishes, roofs, balconies and external paving.
  • External areas: gates, barriers, landscaping irrigation and interlock paving, where they are part of the building’s responsibility.

Then list the specialist systems, even though they may sit outside a general maintenance contract: lifts, fire alarm and detection, sprinklers and suppression, generators, central cooling plant, building management systems and access control. Recording them, with their responsible contractor, means nothing is forgotten and the boundaries are clear.

Decide early how the list treats individual units. In many buildings, equipment inside apartments or offices is the occupier’s responsibility, while common areas and shared systems belong to the building. If unit equipment is outside the building’s scope, you may still want a short note of it, for example where unit AC condensers sit on a shared roof, because access and shared space affect both sides. For a portfolio of several buildings, use the same columns and reference format in every list so that records can be combined and compared.

Fields to record

Use the same fields for every asset. The table below shows a practical set, with an example row.

Field What to record Example
Asset reference A unique code you assign AC-L1-03
Category System or type Air conditioning
Description What the asset is Split unit, lobby
Location Floor, room or area Ground floor lobby
Make, model, serial From the nameplate As shown on label
Quantity If grouping identical items 1
Capacity or rating Where known From nameplate
Installation date If known, or “unknown” Unknown
Condition Your own simple scale Fair
Responsible party Who maintains it Building maintenance contract
Service frequency As agreed in the contract Per contract schedule
Last service and next due Dates From records
Warranty Any manufacturer or installer terms None recorded
Notes Access, defects, history Ladder needed for access

Keep the condition scale simple and define it at the top of the sheet, for example good, fair and poor, with a sentence explaining each. Consistency matters more than precision.

Gathering the information

Start with what you already have: handover documents, operation and maintenance manuals, drawings, previous contractor reports and warranty records. Then walk the building, floor by floor, and photograph each asset and its nameplate.

Where information is missing, record “unknown” rather than guessing. The list improves over time as contractors visit and fill gaps. A visual property maintenance survey can help establish the list and the initial condition of each item, as long as it is understood as a maintenance assessment rather than a structural or engineering survey.

Note access limitations as you go. Equipment that sits above ceilings, on roofs or in locked plant rooms needs access arrangements, and some assets may need specialist access equipment.

Responsibility and boundaries

The responsible party column is often the most valuable part of the list. For each asset, record who maintains it:

  • The building’s general maintenance contractor.
  • A specialist contractor, such as the lift or fire system provider.
  • The individual unit owner or tenant, for in-unit equipment.
  • A utility or service provider, for supplies and meters.
  • The landlord or developer, where a defects or warranty period applies.

Where responsibility is unclear, mark it and resolve it. Unclear ownership is a common reason for faults remaining unresolved.

How the list supports maintenance planning

Once the list exists, it becomes the basis for several other things.

  • Planned preventive maintenance (PPM). Scheduled inspection and servicing of named assets, at frequencies agreed in the contract.
  • Maintenance contract scope. An annual maintenance contract (AMC) for a building should be based on a list of the assets it covers. Quotations built on the same list are much easier to compare. The building AMC service is scoped this way.
  • Defect register. Linking defects to asset references shows where faults recur and supports repair or replacement decisions.
  • Budgeting. Condition and age information helps you anticipate replacements rather than reacting to failures.
  • Reporting. Contractor reports referencing asset codes are easier to check and file. The guide to useful reporting for technical facilities maintenance covers this in more detail.

Keeping the list current

An asset list is only useful if it stays accurate. Update it when equipment is replaced, added or removed, when responsibility changes and after each planned visit. Ask contractors to reference asset codes in their reports and to flag any errors they find. Review the whole list at least when contracts are renewed, so the next scope reflects the building as it is.

Next step

Start your list in the property maintenance planner, using consistent fields and marking specialist systems with their responsible contractor. When it is ready, share it through the building maintenance service page so a maintenance scope can be assessed against the assets you have recorded.

Enquire

Tell us what your property needs

Share the location, the work you have in mind and a few photographs. We will advise on the next step and whether a visit is needed before quoting.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us