Common problem

Damaged floor tiles

Cracked, loose or hollow floor tiles can be a trip hazard and a sign of issues beneath. Safe checks, possible contributing factors and what helps an assessment.

Damaged floor tiles are more than a cosmetic issue. A cracked or loose tile can catch feet, let water reach the layers beneath and spread to neighbouring tiles over time. Sometimes a single tile has been hit by something heavy. Sometimes the damage points to movement or moisture under the surface. This page helps you look at the problem safely and gather details for an assessment. It is not a diagnosis.

What you might notice

  • Hairline or wider cracks across one or more tiles.
  • Tiles that rock, click or sound hollow when you walk on them.
  • Chipped edges or corners.
  • Grout that is cracking, crumbling or missing.
  • Tiles that are lifting or forming a slight peak.
  • Damp, staining or discolouration around damaged tiles, particularly in bathrooms and kitchens.

Possible contributing factors

These are common contributors to tile damage. They are listed to help you describe the issue and are not a diagnosis.

  • Impact. A dropped object or heavy furniture can crack a tile.
  • Adhesive coverage. Tiles without full adhesive support beneath them can sound hollow and crack under load.
  • Substrate movement. Movement in the screed or base beneath can show up as cracks across several tiles.
  • Expansion and movement joints. Large tiled areas without suitable movement provision can be affected by temperature changes.
  • Moisture. Water reaching the bed beneath tiles, especially in wet areas, can weaken the bond.
  • Grout and sealant condition. Failed grout or sealant can let water through to the layers beneath.

Safe checks before you enquire

These checks are visual. Do not lift tiles, chip out grout with tools or attempt to break out damaged sections.

  1. Photograph each damaged tile, with a wider shot showing its position in the room.
  2. Walk carefully across the area and note any tiles that sound hollow or move.
  3. Mark or cover sharp edges or lifted tiles, for example with a rug or tape, so no one trips.
  4. In bathrooms and kitchens, check for damp on walls nearby or on the ceiling below, without opening anything.
  5. Look for any spare tiles left from the original installation, as matching tiles can be difficult to find.
  6. Note whether heavy furniture or appliances sit on or near the damaged area.

Information that helps the assessment

  • The room, the approximate area affected and the overall floor area.
  • The tile size and finish, with a close-up photograph.
  • Whether you have spare matching tiles, or would consider a wider replacement if matching is not possible.
  • Whether the tiles are in a wet area, and any history of leaks.
  • The age of the floor if known, and whether the damage has spread.
  • Furniture that will need moving and any building access rules.

The flooring quantity planner can help you estimate areas if a wider replacement is likely.

Which service fits

Tile installation and replacement can cover removal of damaged tiles, preparation of the base, laying and grouting. Localised replacement depends on matching tiles being available, and the quotation should state whether screed repairs, waterproofing and debris removal are included. Where grout or sealant around otherwise sound tiles has deteriorated, silicone sealing and regrouting may be suitable. If damaged tiles in a wet area seem to be letting water through, waterproofing and leak rectification can be discussed. The guide on tile selection for wet areas may help if you are considering new tiles. Share your location when enquiring; visit times are confirmed when you book.

Enquire

Describe what you are seeing

Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us