Common problem
Reduced water pressure
Weak flow from taps or showers can come from a fitting, a pump or the wider supply. Safe checks, possible contributing factors and what helps an assessment.
Reduced water pressure can make showers frustrating and slow down everyday tasks. It might affect a single tap, one bathroom or the whole property, and that pattern is often the most useful clue for an assessment. In apartments, pressure can also depend on shared building systems that sit outside your unit. This page explains what to look for and how to prepare. It is not a diagnosis of your supply.
What you might notice
- Weak flow from one tap or shower while others are normal.
- Low pressure across the whole property.
- Pressure that drops when another tap or appliance is in use.
- Flow that surges and fades, or spits air.
- Hot water pressure noticeably weaker than cold.
- A change that started suddenly, or one that crept in over time.
Possible contributing factors
These are common contributors to reduced pressure. They are listed to help you describe the issue, not to identify the cause.
- Aerators and shower heads. Limescale and debris can partially block the outlet of a tap or shower head.
- Isolation valves. A valve under a basin or behind a panel that is partly closed can restrict flow.
- Mixers and cartridges. Internal parts can clog or wear and reduce flow at one fitting.
- Water heater arrangement. Hot water pressure can be affected by the heater, its fittings or the pipework serving it.
- Pumps and tanks. Many villas use transfer or booster pumps and storage tanks. Pump settings or faults can affect pressure throughout the property.
- Shared or upstream supply. In apartment buildings, shared risers and pump sets are usually controlled by building management. A leak, maintenance work or supply interruption elsewhere can also play a part.
Safe checks before you enquire
These checks are non-invasive. Do not open pump control panels, adjust pressure settings or work on electrical equipment.
- Test each tap and shower in turn and note which are affected, hot, cold or both.
- Ask neighbours or building management whether others are experiencing the same issue.
- Check whether isolation valves under basins are fully open, only if they turn easily by hand.
- Look at tap aerators and shower heads for visible scale. Leave any removal to the assessment if they do not unscrew easily.
- If you have a villa pump, listen to whether it starts and stops normally and note any unusual noise, from a safe distance.
- Walk around the property and look for damp patches, which could suggest a leak.
Information that helps the assessment
- The property type and whether it has its own tank and pump or relies on a shared building supply.
- Which outlets are affected, hot or cold, and when the change began.
- Photographs of affected fittings, the water heater and any visible pump or tank equipment.
- Any recent plumbing work, water interruptions or building notices.
- Access arrangements for roof tanks, pump rooms or ceiling spaces, including who holds keys.
The maintenance planner can help you set out these details before you enquire.
Which service fits
Plumbing maintenance is the usual starting point. An assessment helps separate a problem at a single fixture from a wider supply issue, and any repair or replacement part is agreed before proceeding. Where a villa relies on its own transfer or booster pump, water pump services can be discussed, with controls, pressure settings and access confirmed first. Shared building pump sets and risers remain the responsibility of the building operator unless that responsibility has been agreed. The guide on reporting a plumbing leak is useful if you suspect a leak is involved. Share your location when enquiring; visit times are confirmed when you book.
Related problems
Leaking taps and mixers
A dripping tap or a mixer leaking at its base wastes water and can damage cabinets. Safe checks, possible contributing factors and what to share when enquiring.
Read more ProblemA toilet that keeps running
A toilet that keeps running or refilling can waste water and keep you awake. Safe checks, possible contributing factors and what to share before an assessment.
Read moreEnquire
Describe what you are seeing
Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.
Visit times and any assessment charge are confirmed before booking.