Common problem

Uneven external interlock paving

Sunken, rocking or raised interlock pavers can create trip hazards and pooling water. Safe checks, likely contributors and what helps an interlock assessment.

Interlock paving is popular for driveways, paths and patios because individual blocks can be lifted and relaid. Over time, though, areas can sink, rock or rise, leaving trip hazards and puddles. Sometimes only the surface needs relaying. Often the cause lies in the base beneath, and replacing the pavers alone may not last. This page helps you look at the problem safely and gather useful details. It is general guidance rather than a diagnosis.

What you might notice

  • Dips or hollows in the paving, often in driveways where vehicles park.
  • Pavers that rock or click when walked on.
  • Raised blocks near trees or planting.
  • Gaps opening between pavers, with joint sand washing out.
  • Water pooling in the same spots after rain or cleaning.
  • Edges or kerbs moving outwards, letting pavers spread.
  • Weeds growing in the joints.

Possible contributing factors

These are common contributors to uneven interlock. They are listed to help you describe the issue, not as a diagnosis.

  • Base preparation. A base that was not suitably compacted or built up for the expected load can settle over time.
  • Vehicle loading. Driveways carry heavier loads than paths and may need a different build up.
  • Water. Poor drainage, leaking irrigation or a nearby pipe leak can soften the base.
  • Edge restraint. If edging moves, pavers can spread and joints open.
  • Tree roots. Roots can lift sections of paving.
  • Previous works. Areas that were lifted for services or repairs and not fully reinstated can settle unevenly.

Safe checks before you enquire

These checks are visual and non-invasive. Do not dig beneath pavers, lift sections near services or use pressure washers on loose joints.

  1. Photograph the uneven areas, with a wider shot showing their position on the property.
  2. Note whether the problem is in a driveway, path or patio, and whether vehicles use the area.
  3. After rain or watering, note where water pools and how long it stays.
  4. Check for any leaking irrigation, outdoor taps or damp near the affected area.
  5. Mark obvious trip hazards, for example with a planter or cone, until they are repaired.
  6. Note any nearby manholes, drains or service covers.

Information that helps the assessment

  • The approximate area of paving affected and the total paved area.
  • Photographs and, if possible, a short video showing pavers rocking.
  • How the area is used, including vehicle access.
  • Whether you want local repairs or a wider relay, and whether you have spare matching pavers.
  • Any known services, irrigation lines or drains beneath the paving.
  • Who else needs to agree to the work, such as a landlord or community management.

The flooring quantity planner can help you estimate areas, and the guide on interlock repair planning covers the decisions in more detail.

Which service fits

Interlock works can include lifting damaged sections, preparing the base, laying pavers, reinstating edges and finishing joints. Where paving has sunk, correcting the underlying base is often needed rather than simply replacing the surface. The quotation should define excavation, disposal, levels and drainage interfaces. Once repairs are complete, external pressure washing can be discussed for surrounding paved areas, using a method matched to the material. Share your location when enquiring; visit times are confirmed when you book.

Enquire

Describe what you are seeing

Send a short description, when it started and a photograph or video if it is safe to take one. We will advise whether a visit is needed.

Telephone04 582 4141 Mobile+971 52 568 4874 Emailinfo@cafmglobal.com WhatsAppMessage us

Visit times and any assessment charge are confirmed before booking.

WhatsApp us